8
GB
Wash cycles

Table of wash cycles

Wash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergents
Max. load (kg)
Residual
dampness %
Energy
consumption
kWh
Total water lt
Cycle
duration
Wash
Fabric
softener
Essentials
1Anti Stain 40° 1500   5 - - - 180’
2Whites 60° 1500   5 - - - 180’
Cotton Standard 60° (1): heavily soiled whites and resistant colours. 60°
(Max. 90°) 1500   8 44 1.09 73 200’
Cotton Standard 40° (2): lightly soiled resistant and delicate colours. 40° 1500   8 44 1.01 84 185’
5Cotton Standard 20°: lightly soiled resistant and delicate colours. 20° 1500   8 - - - 175’
6Synthetics: heavily soiled resistant colours. 60° 800   4 46 1.03 60 110’
6Synthetics (3): lightly soiled resistant colours. 40° 800   4 46 0.56 60 95’
Specials
7Anti Allergy 60° 1500   5- - - 195’
8Baby 40° 1000   5- - - 145’
9Bed&Bath: washes bathroom laundry and bedlinen. 60° 1500   8 - - - 140’
10 Fastwash 60’: to refresh normal soiled garments quickly (not suitable
for wool, silk and clothes which require washing by hand). 60° 1500 3.5 44 0.84 44 60’
11 Fastwash 30’: to refresh lightly soiled garments quickly (not suitable
for wool, silk and clothes which require washing by hand). 30° 800 3.5 71 0.20 38 30’
Extras
12 Shirts 40° 600   2- - - 70’
13 Wool: for wool, cashmere, etc. 40° 800   2- - - 90’
14 Delicates 30° 0   1- - - 80’
Partials cycles
ARinse - 1500 - 8- - - 36’
BSpin+Pump out - 1500 - - 8- - - 16’
The length of cycle shown on this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors
such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for
garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for
garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C.
3) Long wash cycle for synthetics: set wash cycle 6 with a temperature of 40°C.