Hotpoint hm315x f Troubleshooting, Malfunctions, Possible causes / Solutions

Models: hm315x f

1 12
Download 12 pages 37.98 Kb
Page 9
Image 9
Troubleshooting

Troubleshooting

If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following

list.

GB

 

Malfunctions:

Possible causes / Solutions:

The internal light does not illuminate.

The refrigerator and the freezer do not cool well.

The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house.

The doors do not close properly or the seals are damaged.

The doors are opened too frequently.

The TEMPERATURE ADJUSTMENT knob is not in the correct position

The refrigerator or the freezer have been over-filled.

The atmospheric temperature of the area surrounding the appliance is lower than 14°C.

The food inside the refrigerator is beginning to freeze.

The motor runs continuously.

The appliance makes a lot of noise.

Some of the external parts of the refrigerator become hot.

The back wall of the refrigerator unit is covered in frost or droplets of water.

There is water at the bottom of the refrigerator.

The TEMPERATURE ADJUSTMENT knob is not in the correct position.

The food is in contact with the back inside wall of the refrigerator.

The door is not closed properly or is continuously opened.

The outside ambient temperature is very high.

The thickness of the frost exceeds 2-3 mm (see Maintenance).

The appliance has not been installed on a level surface (see Installation).

The appliance has been installed between cabinets that vibrate and make noise.

The internal refrigerant makes a slight noise even when the compressor is off. This is not a defect, it is normal.

These raised temperatures are necessary in order to avoid the formation of condensation on certain parts of the product.

This shows the appliance is operating normally.

The water discharge hole is blocked (see Maintenance).

Don’t forget should our advice fail to resolve the problem with your appliance please call us on 08448 224 224 to arrange an engineer visit. Or visit www.hotpointservice.co.uk

Product failures are fully covered by your 12 months parts and labour guarantee. However, if we attend and there is no product failure or the failure has been caused by damage, misuse or by incorrect installation, charges will apply.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

9

Page 9
Image 9
Hotpoint hm315x f operating instructions Troubleshooting, Malfunctions, Possible causes / Solutions