Installation

 

! Before operating your new appliance, please read

GB

these operating instructions carefully. They contain

 

important information for safe use, installation and care

 

 

of the appliance.

 

! Please keep these operating instructions for future

 

reference. Pass them on to possible new owners of the

 

appliance.

 

Positioning and connection

Positioning

1.Place the appliance in a well-ventilated humidity-free room.

2.Do not obstruct the rear fan grills. The compressor

and condenser give off heat and require good ventilation to operate correctly and save energy.

3.Ensure the appliance is far away from any sources of heat (direct sunlight, electric stove, etc.).

Electrical connections

After transportation of the appliance, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

•The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

•The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

4

Page 3 Page 5
Page 4
Image 4
Hotpoint HT303NI manual Installation, Positioning and connection, Electrical connections
Page 3 Page 5

HT303NI specifications

The Hotpoint HT303NI is a contemporary built-in microwave that epitomizes convenience and innovation in modern kitchen design. With a sleek stainless steel finish, this appliance not only complements any kitchen décor but also enhances its overall aesthetic. Designed with user experience in mind, the HT303NI boasts a range of features and technologies that ensure efficient cooking and reheating.

One of the standout features of the Hotpoint HT303NI is its comprehensive microwave capability, including multiple power levels allowing users to customize cooking according to their specific needs. This flexibility is ideal for defrosting, reheating, and cooking a variety of dishes, from microwave popcorn to hearty casseroles. The maximum microwave power of approximately 900 watts ensures that food is cooked evenly and thoroughly, reducing the chances of hot and cold spots that can affect meal quality.

In addition to standard microwave functions, the HT303NI offers a grill option, providing an additional cooking method for users who prefer a crispy finish on their meals. This feature is perfect for grilling meat, toasting bread, or achieving a golden-brown topping on casseroles, enhancing the flavor and texture of the dishes prepared.

The appliance is equipped with advanced sensor cooking technology, which automatically adjusts cooking times and power levels according to the food being prepared. This intelligent feature not only simplifies cooking but also helps prevent overcooking, saving time and preserving nutrients in the food.

Featuring a user-friendly electronic control panel, the Hotpoint HT303NI allows for intuitive operation. The clear display and touch controls make selecting cooking modes and settings straightforward, catering to both culinary novices and experienced cooks alike. Additionally, the built-in timer and clock functions enhance functionality, making meal preparation even more seamless.

Safety is a priority with the HT303NI, which includes a child lock feature to prevent accidental operation, making it a practical choice for families. The appliance is also designed for easy cleaning, with a removable turntable and interior surfaces that resist stains and odors.

In summary, the Hotpoint HT303NI combines modern design with practical features, making it an excellent addition to any kitchen. Its versatile cooking options, user-friendly interface, and safety features ensure that users can prepare a wide variety of meals with ease and confidence.
Top Page Image Contents