Connecting the drain hose

Your appliance is now supplied with a 13 amp fused

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

plug it can be plugged into a 13 amp socket for G B immediate use. Before using the appliance please

read the instructions below.

WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a

alternatively, place it over the edge of a basin, sink or tub, fastening the duct supplied to the tap (see figure). The free end of the hose should not be underwater.

￿We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the applicable law;

•the socket is able to sustain the appliance's maximum power load indicated in the Technical details table (on the page 5);

•the supply voltage is included within the values indicated on the Technical details table

(on the page 5);

•the socket is compatible with the washing machine's plug. If this is not the case, replace the socket or the plug.

replacement is obtained. Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to re-route the mains cable through partitions, units etc., please ensure that either:

the plug is replaced by a fused 13 ampere re- wearable plug bearing the BSI mark of approval. or:

the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug:

Important: the wires in the mains lead are coloured in accordance with the following code:

Green

& Yellow E a r t h

B l u e

N e u t r a l

B r o w n

L i v e

3

Page 2 Page 4
Page 3
Image 3
Hotpoint HVL 241 manual V e
Page 2 Page 4

HVL 241 specifications

The Hotpoint HVL 241 is a modern and efficient undercounter freezer that is designed to meet the demands of contemporary kitchens while offering a range of features that enhance convenience and usability. This appliance is particularly suitable for those who require extra storage space without the bulk of a large freezer.

One of the main features of the Hotpoint HVL 241 is its generous 242 liters of storage capacity. This spacious interior is efficiently organized to allow for easy access and optimal storage of various food items. The freezer is equipped with transparent drawers, which make it easy to see what's inside without having to open each drawer. This helps to minimize frost accumulation and allows for efficient organization of food products.

The HVL 241 is designed with energy efficiency in mind, boasting an impressive A++ energy rating. This not only helps to reduce electricity bills but also ensures that the appliance has a lower environmental impact, making it a sustainable choice for energy-conscious consumers.

In terms of technology, the Hotpoint HVL 241 features a fast freeze function that quickly lowers the temperature inside the freezer when new items are added. This is particularly useful for preserving the freshness of recently purchased food and prevents temperature fluctuations that can compromise food quality. Additionally, the freezer includes a temperature alarm that alerts users when the internal temperature rises above the safe threshold, providing peace of mind for those concerned about food safety.

Another noteworthy characteristic of the Hotpoint HVL 241 is its frost-free technology. This feature eliminates the need for manual defrosting, as it prevents the build-up of ice within the freezer. This not only saves time and effort but also maximizes usable storage space.

The design of the HVL 241 is sleek and modern, making it an attractive addition to any kitchen. Its compact profile allows it to fit seamlessly under countertops, making it an excellent choice for smaller spaces.

Overall, the Hotpoint HVL 241 undercounter freezer combines practicality with advanced technology to provide a reliable and efficient freezing solution for households. With its ample capacity, energy efficiency, and user-friendly features, it is ideal for anyone looking to maintain the quality and longevity of their frozen foods.
Top Page Image Contents