EN

Connecting the water supplies

Connection to the water and electricity supplies should only be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses or the electricity supply cable.

Connecting the water inlet hose

The water inlet and outlet hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation.

•To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection.

•To a suitable hot water connection point: your dishwasher may be provided with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a cold water supply.

If the inlet hose is not long enough, contact a specialist store or an authorised technician (see After Sales Service).

The water pressure must be within the values indicated in the Technical data table (see Installation).

The hose should not be bent or compressed.

The appliance must be connected to the water supply network using new hoses.

Do not use old hoses.

Ensure that the new hose supplied is connected and the old hose is disposed of safely.

DO NOT overtighten the hose connector, hand tight is sufficient.

Ensure the fill hose is not kinked.

Tap connections*: A range of adaptors are available to suit your tap.

DO NOT connect the dishwasher to a single outlet instantaneous water heater or an electric heater.

Sink Waste System

Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 32 mm.

The outlet hose must be at a height ranging from 40 to 80 cm (from 15’’ to 31’’) from the floor / surface where the dishwasher rests (A).

•before connecting the drain hose, remove any internal restrictions; this will prevent a build up of debris which could cause a blockage

•remove any restrictions from the waste spigot and ensure that the sealing bung is removed (B).

It MUST NOT be connected to a surface water drain.

•Untie the end of the GREY drainage hose from the rear of the appliance.

•If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug.

Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood.

Fit hose to waste securely using a “Jubilee” type clip.

*Only available in selected models.

4

Page 3 Page 5
Page 4
Image 4
Hotpoint LFS 114, Hotpoint Dishwasher Connecting the water supplies, Sink Waste System, Connecting the water inlet hose
Page 3 Page 5

Hotpoint Dishwasher, LFS 114 specifications

The Hotpoint LFS 114 is a reliable and efficient dishwasher designed to meet the needs of modern households. With its sleek design and robust performance, it stands out as a popular choice for families looking for effective dishwashing solutions.

One of the key features of the Hotpoint LFS 114 is its capacity. This model is designed to accommodate up to 13 place settings, making it ideal for larger families or those who frequently entertain guests. The adjustable shelves and foldable racks allow for flexible loading, ensuring that even bulky pots and pans can fit comfortably.

Energy efficiency is another highlight of the Hotpoint LFS 114. It is rated A+ for energy efficiency, meaning it uses less electricity compared to older models without compromising on cleaning performance. This is an essential feature for environmentally conscious consumers who want to reduce their household's carbon footprint while saving on energy bills.

The dishwasher comes equipped with multiple wash programs tailored to suit various washing needs. From intensive cycles for heavily soiled dishes to quick washes for lightly soiled ones, the Hotpoint LFS 114 offers versatility. The Half Load option is particularly useful for smaller loads, saving both time and energy.

Additionally, the Hotpoint LFS 114 features several advanced technologies aimed at enhancing the washing experience. The AquaStop system ensures that there are no water leaks, providing peace of mind for users. The dishwasher also includes a delay start function, allowing users to schedule washes at their convenience, which is especially helpful during off-peak energy hours.

Noise levels are another consideration in its design; the Hotpoint LFS 114 operates at a low noise level, making it a suitable choice for open-plan living spaces. Users can run the dishwasher at night without being disturbed, contributing to a tranquil home environment.

Cleaning performance is backed by Hotpoint's innovative technology, which delivers outstanding results. The powerful spray arms ensure a comprehensive wash, tackling tough stains and burnt-on food with ease. The model is also designed for easy maintenance, with a removable filter and accessible parts for straightforward cleaning.

In summary, the Hotpoint LFS 114 dishwasher combines capacity, energy efficiency, and advanced technologies to provide an effective solution for dishwashing needs. With its user-friendly features and reliable performance, it stands as a top choice for those looking to simplify their kitchen chores.
Top Page Image Contents