®
RB757WH/CH/EH – Hotpoint 30"
Dimensions (in inches)
29-7/8
REAR
WALL
46-1/2
1/4†
7
5
|
CENTER LINE
KW Rating
240V 11.7
208V 8.8
Breaker Size
40 Amps†
†Note: Check local codes for required breaker size.
Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a
Note: 30" Electric Ranges conform to U.L. requirements for 0" spacing from
† The range may be placed with 0" clearance (flush) at the back wall and side walls if the range side
46-3/8
*Dimension from wall to front of closed oven door. Dimension from wall to the front of closed oven door handle is
walls below countertops. Allow
Receptacle Locations: Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against rear wall.
Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.
Specification Revised 11/05
All Hotpoint ranges are equipped with an
an important, required step in the installation of the range.
Listed by
Underwriters
RLaboratories
420486