Hotpoint RB787WC/BC dimensions Dimensions in inches, 29-7/8 46-1/2 1/4† 26-3/8 46-3/8, KW Rating

RB787WC/BC - Hotpoint 30" Free-Standing Self-Cleaning Electric Range

Dimensions (in inches)

29-7/8

46-1/2

1/4†

26-3/8*

46-3/8

	7-1/2
	7
7-1/2	5
	3-1/2
REAR	2-1/4
WALL
2-1/4
	CENTER LINE

†The range may be placed with 0" clearance (flush) at the back wall and side walls if the range side trims extend beyond the cabinet fronts at least 1/4". Self-Clean models only

*Dimension from wall to front of closed oven door. Dimension from wall to the front of closed oven door handle is 28-1/2.

KW Rating

240V	10.5
208V	7.9

Breaker Size

40 Amps†

†Note: Check local codes for required breaker size.

A properly grounded branch circuit with a 3 prong grounding type receptacle is required for Hotpoint ranges.

Note: 30" Electric Ranges conform to U.L. requirements for 0" spacing from walls below countertops. However some kitchen cabinet finishes can be damaged by heat from the range heating elements. It is recommended that a clearance of at least 1-1/2 inches be maintained to walls. Where varnished wood or plastic film finishes are used, a minimum clearance of 6 inches should be maintained.

Receptacle Locations: Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against rear wall.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

Specification Created 7/00

All Hotpoint ranges are equipped
with an Anti-Tip device. The		Listed by
installation of this device is
		Underwriters
an important, required step in
	R	Laboratories
the installation of the range.