Hotpoint RFA52 manual The fact that they are situated on the top part of the freezer

Models: RFA52

1 12
Download 12 pages 14.39 Kb
Page 7
Image 7
The fact that they are situated on the top part of the freezer
Fast Freeze Switch

!Do not open the door during freezing.

!If there is a power cut or malfunction, do not open the freezer door. This will help maintain the temperature inside the freezer, ensuring that foods are conserved for at least 9 -14 hours.

!If the room temperature drops below 14°C for an extended period of time, the ideal temperature will not be reached in the freezer compartment and food preservation will be reduced.

Fast Freeze switch

The appliance is fitted with a manual "Fast Freezer" switch.

When loading fresh food

to freeze switch "Fast Freeze" on.

To set "Fast Freeze" ON,

press the switch to "I"

This switch activates intensive cooling to

ensure that required

temperatures are reached

quickly.

So when the fresh food is

frozen return the switch to its OFF position, "0". Note: for Energy Saving ensure that "Fast Freeze" is switched off after 24 hours.

For the refrigerator to operate properly the "Fast Freeze" button must be ON when room temperature is 16°C or lower.

Ice tray

The fact that they are situated on the top part of the freezer

GB

 

drawers ensures greater cleanliness: the ice no longer comes

 

into contact with the food placed inside the freezer

 

compartment; furthermore, the dripping of the water during

 

filling is avoided (a lid to cover up the hole after filling with

 

water is also provided).

 

1.Pull out the tray by pushing it up.

Check that the tray is completely empty and fill it with water through the opening provided.

2.Take care not to exceed the level indicated (MAX WATER LEVEL). Excess water prevents the ice cubes from dispensing (if this happens, wait for the ice to melt and empty the tray).

3.Turn the tray 90°: due to the connected compartments each mould fills with water (see diagram).

4.Close the opening with the lid provided and put the tray back, placing the top part in the corresponding housing and allowing it to drop in again.

5.When the ice has formed (minimum time approximately 8 hours) knock the tray against a hard surface and wet the outside so that the ice cubes come loose and take them out through the opening.

MAX

WATER LEVEL

WATER

MAX

LEVEL

 

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

7

Page 7
Image 7
Hotpoint RFA52 manual The fact that they are situated on the top part of the freezer, water is also provided