Door Reversal

Door Reversal continued...

11.Unscrew the foot and hinge bracket fitted to the bottom right hand side of the appliance. Unscrew the foot and footplate fitted to the left hand side of the appliance.

12.Refit the hinge bracket and footplate to the opposite sides of the appliance. Screw in the feet until there is approximately 35mm projecting from the bottom front edge of the appliance.

Note : You may require assistance to do this:

13.Lift the appliance from the rear of the tabletop and stand it on its feet and wheels. Be careful that the appliance does not run away with you when the wheels touch the floor.

Refit the spacing washers.

Refit Lower Door

14.Take off the two screw covers from the left hand centre panel and remove the two screws. Fit these screws and covers over on the right hand side.

15.Fit the centre hinge on the left hand side with the original screws, cover the screws with the original covers.

16.Using a thin blunt instrument, remove the hinge bush cap from the top left of the lower door and fit on the top right.

Note : You may require assistance to do this:

17.Place the lower door onto the lower hinge pin.

18.Offer the door up to the centre hinge.

Put the hinge pin through the centre hinge and ensure it locates into the door. Check that the hinge pin is positioned the right way up.

Refit Top Door

19.Using a thin blunt instrument, remove the hinge bush cap from the top left of the door and refit on the top right.

20.Replace the spacing washers onto the centre hinge bracket.

Note : You may require assistance to do this:

21.Place the top door hinge onto the top left of the door, slide the door onto the centre hinge pin. Support the door while screwing the top hinge into position.

Ensure that the hinge bracket locates correctly.

22.If necessary, slacken off the screws on the centre hinge pin and adjust the doors so that they line up with the cabinet.

23.Adjust the front feet (see ‘Levelling’ SAFETY & INSTALLATION section).

Note : Let the appliance stand upright in it’s final location for at least 15 minutes before plugging in and switching on the electricity supply.

WARNING: Failure to level the appliance correctly may result in

19

misalignment of the cabinet and/or doors.

 

MAINTENANCE

CLEANING&

 

 

Page 18 Page 20
Page 19
Image 19
Hotpoint RFA08, RFM08, RFA63, RFA73, RFM63, RFM73 manual Refit Lower Door, Refit Top Door
Page 18 Page 20

RFA08, RFM63, RFA63, RFM73, RFM08 specifications

The Hotpoint range of refrigerators, including models RFA73, RFM08, RFM73, RFA63, and RFM63, stands out for their innovative features, modern design, and user-friendly technologies, catering to diverse refrigeration needs in the modern kitchen.

The Hotpoint RFA73 model is recognized for its spacious interior and energy efficiency. With a total gross capacity of around 368 liters, it offers ample room for all types of food items. The model includes adjustable shelves, a salad crisper, and door storage to make sure everything has its place. Additionally, the high energy rating helps users reduce their electricity bills while contributing positively to environmental sustainability.

In contrast, the RFM08 model embodies versatility with its combi design, integrating both refrigeration and freezing capabilities. It features a well-organized fridge compartment with multiple shelves and a frost-free freezer, highlighting user convenience by eliminating the need for manual defrosting. The model's sleek aesthetic complements modern kitchen styles while ensuring the preservation of food quality.

The RFM73 model takes these features a step further with an advanced cooling system that maintains a consistent temperature. Its multi-airflow technology ensures cold air circulates efficiently throughout the compartments, minimizing temperature fluctuations and preserving the freshness of food for a longer period. The model also includes easy-to-use electronic controls for precise temperature management.

The RFA63 model is designed with practicality in mind, featuring an integrated LED lighting system that illuminates the interior, making it easy to locate items. It has a robust build and is equipped with adjustable glass shelves that allow for customization based on storage needs. The model also boasts a low noise level, ensuring a peaceful kitchen environment.

Finally, the RFM63 is an excellent choice for families, combining a large capacity with family-focused features such as an extra-wide fresh food compartment for maximum organization and accessibility. With its advanced cooling technology and energy-efficient performance, the RFM63 provides a reliable solution for keeping food fresh while being gentle on energy consumption.

Overall, these Hotpoint models showcase a blend of functionality, durability, and style, making them ideal for any household looking to enhance their food storage solutions. With their commitment to quality and innovation, Hotpoint refrigerators continue to meet the evolving demands of modern living.
Top Page Image Contents