Installation Instructions

1PROVIDE ADEQUATE GAS SUPPLY

Your range is designed to operate at a pressure of 4″ of water column on natural gas or, if designed for LP gas (propane or butane), 10″ of water column.

Make sure you are supplying your range with the type of gas for which it is designed.

This range is convertible for use on natural or propane gas. If you decide to use this range on LP gas, conversion must be made by a qualified LP installer before attempting to operate the range on that gas.

For proper operation, the pressure of natural gas supplied to the regulator must be between 4″ and 13″ of water column.

For LP gas, the pressure supplied must be between 10″ and 13″ of water column.

When checking for proper operation of the regulator, the inlet pressure must be at least 1″ greater than the operating (manifold) pressure as given above.

The pressure regulator located at the inlet of the range manifold must remain in the supply line regardless of whether natural or LP gas is being used.

A flexible metal appliance connector used to connect the range to the gas supply line should have an I.D. of 1/2″ and be

5 feet in length for ease of installation. In Canada, flexible connectors must be single wall metal connectors no longer than 6 feet in length.

2CONNECT THE RANGE TO GAS

Shut off the main gas supply valve before disconnecting the old range and leave it off until the new hookup has been completed. Don’t forget to relight the pilot on other gas appliances when you turn the gas back on.

Because hard piping restricts movement of the range, the use of a CSA International- certified flexible metal appliance connector is recommended unless local codes require a hard-piped connection.

Never use an old connector when installing a new range. If the hard piping method is used, you must carefully align the pipe; the range cannot be moved after the connection is made.

To prevent gas leaks, put pipe joint compound on, or wrap pipe thread tape with Teflon* around, all male (external) pipe threads.

AInstall a manual gas line shut-off valve in the gas line in an easily accessed location outside of the range. Make sure everyone operating the range knows where and how to shut off the gas supply to the range.

BInstall male 1/2″ flare union adapter to the 1/2″ NPT internal thread at inlet of regulator. Use a backup wrench on the regulator fitting to avoid damage.

CInstall male 1/2″ or 3/4″ flare union adapter to the NPT internal thread of the manual shut-off valve, taking care to back-up the shut-off valve to keep it from turning.

DConnect flexible metal appliance connector to the adapter on the range. Position range to permit connection at the shut-off valve.

EWhen all connections have been made, make sure all range controls are in the off position and turn on the main gas supply valve. Use a liquid leak detector at all joints and connections to check for leaks in the system.

WARNING — DO NOT USE A FLAME TO CHECK FOR GAS LEAKS.

When using test pressures greater than 1/2 psig to pressure test the gas supply system of the residence, disconnect the range and individual shut-off valve from the gas supply piping. When using test pressures of 1/2 psig or less to test the gas supply system, simply isolate the range from the gas supply system by closing the individual shut-off valve.

*Teflon: Registered trademark of DuPont

27

Page 26 Page 28
Page 27
Image 27
Hotpoint RGA720, RGA724 owner manual Connect the Range to GAS, Provide Adequate GAS Supply
Page 26 Page 28

RGA720, RGA724 specifications

The Hotpoint RGA724 and RGA720 are standout models in the realm of freestanding gas ranges, designed to deliver exceptional cooking performance and user-friendly features. Both models blend modern technology with a classic design that fits seamlessly into various kitchen aesthetics.

One of the main features of the Hotpoint RGA724 and RGA720 is their powerful cooktop configuration. These ranges typically offer four burners with varying heat outputs, allowing home cooks to achieve precise cooking results. The burners include a high-output option, perfect for tasks that require rapid heating, such as boiling water or searing meats, while lower-output burners are ideal for simmering sauces or cooking delicate dishes.

Both the RGA724 and RGA720 are equipped with a spacious oven space that provides ample room for cooking multiple dishes simultaneously. The ovens feature a conventional baking system that ensures even heat distribution, promoting consistently baked goods and perfectly roasted meals. An additional highlight is the self-cleaning option, which allows users to maintain their range with minimal effort, making oven maintenance a hassle-free experience.

Another key technological advancement found in both models is the gas oven's precise temperature control. Adjusting the temperature is smooth and straightforward, ensuring that culinary enthusiasts can replicate recipes with accuracy. Additionally, both models feature a broiler unit, allowing for versatile cooking techniques from browning and melting cheese to quick cooking finishes.

The Hotpoint RGA724 and RGA720 also emphasize user convenience with their intuitive control panels. The knobs and digital displays are designed for easy readability and operation, enhancing the overall cooking experience. Moreover, these models often include a built-in ignition system that ensures quick and reliable burner lighting, eliminating the need for matches or lighters.

Safety is a priority with Hotpoint ranges, as demonstrated by their flame failure device, which automatically turns off the gas supply if a burner goes out. This feature provides peace of mind to users, particularly families with children.

In summary, the Hotpoint RGA724 and RGA720 models excel in both performance and functionality, making them an excellent choice for anyone looking to elevate their cooking experience. With their robust build, advanced features, and thoughtful safety elements, these gas ranges stand as reliable kitchen companions for everyday culinary adventures.
Top Page Image Contents