Hotpoint RL150P, RL150G operating instructions Installation, Positioning and connection

Models: RL150G RL150P

1 12
Download 12 pages 27.9 Kb
Page 2
Image 2

Installation

GB

! Before placing your new appliance into operation please

read these operating instructions carefully. They contain

 

 

important information for safe use, for installation and for

 

care of the appliance.

 

! Please keep these operating instructions for future

 

reference. Pass them on to possible new owners of the

 

appliance.

 

Positioning and connection

Positioning

1.Place the appliance in a well-ventilated humidity-free room.

2.Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3.Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 5 cm between the sides and any furniture/side walls.

4.Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).

5.In order to maintain the correct distance between the appliance and the wall behind it, fit the spacers supplied in the installation kit, following the instructions provided.

Levelling

1.Install the appliance on a level and rigid floor.

2.If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

The appliance is earthed and the plug is compliant with the law.

The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Connection of the water supply

To carry this out, use the kit provided which contains all the necessary elements for connection to the water supply. To improve the performance of the Aqua Care, we recommend that you fit a tap with a filter on the pipe for the connection to the water system: in this way it will be possible to manually interrupt the water supply during long periods in which Aqua Care is not used.

!The water pressure inside the water system must be between 0.8 bar and 8 bar.

!The appliance must only be connected to a water supply suitable for drinking.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re-

wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

2

Page 2
Image 2
Hotpoint RL150P, RL150G operating instructions Installation, Positioning and connection

RL150G, RL150P specifications

The Hotpoint RL150P and RL150G refrigerators are exemplars of modern cooling technology, designed to cater to the diverse needs of households. Both models combine efficient performance with innovative features, offering consumers a reliable refrigeration solution.

One of the standout characteristics of the RL150P and RL150G is their impressive energy efficiency. They are designed to operate with minimal electricity consumption, which not only helps reduce utility bills but also contributes to a more sustainable lifestyle. This energy efficiency is particularly significant in today’s eco-conscious market, where consumers are increasingly looking for appliances that minimize their environmental impact.

In terms of storage capacity, both models provide ample space with adjustable shelving. This allows users to customize the interior layout to suit their specific needs, accommodating everything from large party platters to tall bottles. The spacious design is complemented by practical door storage, which is perfect for small jars and bottles, keeping everything within reach.

Another noteworthy feature of the RL150P and RL150G is their No Frost technology. This innovative feature eliminates the need for manual defrosting, ensuring that the refrigerating compartment remains frost-free and odorless. It preserves the quality of food while also making maintenance simple and hassle-free.

The models are also built with a user-friendly interface, featuring clear temperature controls that ensure precise adjustments. This allows users to set their desired cooling levels easily, ensuring optimal food preservation. The subtle yet sleek exterior design offers a modern flair that fits seamlessly into any kitchen decor, available in multiple colors to suit individual tastes.

Safety is a priority in the design of the Hotpoint RL150P and RL150G. They come equipped with advanced security features, including a door alarm that alerts users if the refrigerator door is left ajar. This not only prevents energy waste but also ensures that food remains at safe temperatures.

Finally, both models are backed by a solid warranty, providing peace of mind regarding their durability and performance. With these features and technologies, the Hotpoint RL150P and RL150G stand out as reliable and efficient solutions for modern culinary needs, combining style, functionality, and sustainability. These refrigerators exemplify how contemporary appliances can enhance everyday life while promoting energy efficiency and ease of use.