door stop

Maintenance

CLEANING &

MAINTENANCE

 

 

You will need a selection of small hand tools, screwdrivers, spanners etc. to carry out this procedure.

Our Service Department can arrange for an Engineer to do the conversion for you but a charge will be made.

Door Reversal

WARNING: Switch off electrical supply and pull out the mains plug.

Remove loose items/fittings from inside the fridge and place food into insulated containers whilst carrying out this operation.

1.Open the door as wide as possible.

Note : You may require assistance to do this:

2.Support the door and using a screwdriver, remove the screw securing the top hinge.

3.Carefully tilt the door to remove the hinge from the cabinet and lift the door off the bottom hinge.

4.Remove the spacing washers from the bottom hinge.

Note : You may require assistance to do this:

5.Using the packaging from the appliance or a suitable substitute to support the back of the appliance. Lay the appliance on it’s back ensuring the pipework at the back is not damaged or bent. Be careful that the appliance does not run away from you when the wheels touch the floor.

6.Unscrew the foot plate and hinge bracket fitted to the bottom right hand side of the appliance. Unscrew the foot and footplate fitted to the bottom left hand side of the appliance.

7.Refit the hinge bracket and the footplate to the opposite sides of the appliance. Screw in the feet until there is approximately 35mm projecting from the bottom front edge of the appliance.

8.Lift the appliance onto it’s feet. You may require assistance to do this: Lift the appliance from the rear of the tabletop and stand it on it’s feet and wheels. Be careful that the appliance does not run away from you when the wheels touch the floor.

9.Using a thin blunt instrument, remove the hinge bush cap from the top left of the door and refit on the top right.

10. If applicable - using a screwdriver, remove the door stop from the bottom right of the door and refit on the bottom left.

Note : You may require assistance to do this:

11.Replace the top hinge onto the door, slide the door onto the bottom hinge pin and support the door whilst screwing the top hinge into position. Ensure that the top hinge bracket is positioned correctly.

12.Adjust the front feet (see ‘Levelling’ SAFETY & INSTALLATION section).

Note : Let the appliance stand upright in it’s final location for at least 15 minutes before plugging in and switching on the electricity supply.

12

Page 12
Image 12
Hotpoint RLM34, RLM36, RLA34, RLA36 manual Maintenance, Door Reversal

RLA36, RLM36, RLA34, RLM34 specifications

Hotpoint has made a notable mark in the world of refrigeration with its RLM34, RLA34, RLM36, and RLA36 models, each equipped with innovative features and efficient technologies designed to enhance user experience and performance in the modern kitchen.

The RLM34 and RLM36 refrigerators offer a remarkable combination of style and functionality. These models are part of Hotpoint's renowned range of freestanding fridges, which boast spacious interiors with smart organization options. The RLM models are specifically designed with a sleek, contemporary look that fits seamlessly into any kitchen decor. They provide ample storage solutions with adjustable shelves, allowing users to customize the layout according to their needs. Additionally, these fridges include deep door bins and transparent crisper drawers that keep fresh fruits and vegetables easily accessible.

On the other hand, the RLA34 and RLA36 models are top-mount fridges that offer a compact yet efficient design. These refrigerators are perfect for smaller spaces while still providing ample storage. The RLA models incorporate a flexible shelving system, which includes spill-proof shelves, ensuring easy cleaning and maximum storage capability. The thoughtful design of the RLA series allows for easy access to both fresh and frozen goods, with each compartment engineered for optimal organization.

Both series feature Hotpoint’s advanced cooling technologies. The Active Fresh technology helps maintain the freshness of food by ensuring consistent temperature and humidity levels. This feature is especially useful for prolonging the shelf life of perishables, reducing food waste, and saving money in the long run. Furthermore, the energy-efficient performance of these models is in line with contemporary environmental standards, making them a responsible choice for eco-conscious consumers.

The quiet operation of these refrigerators is another significant characteristic, ensuring that they can be placed in living spaces without causing disturbances. With a robust build quality and reliable performance, Hotpoint continues to showcase its commitment to manufacturing appliances that combine convenience, efficiency, and style. In an age where home appliance technology plays an essential role in day-to-day life, the RLM34, RLA34, RLM36, and RLA36 models stand out as exemplary choices for consumers seeking reliability and advanced features in their refrigeration solutions.