&MAINTENANCE
CLEANING
Door Reversal
14.With the door furniture removed carefully lie the door onto its interior lining.
| We recommend that you lie the door onto a suitable | seal stop | |
| protective material (ie. the original packaging). |
| |
15. | Remove the seal stop on the top left of the door: |
| |
| Remove the fixing screw, then using a thin blunt |
| |
| instrument, lever the seal stop off the door. |
| |
| Repeat to remove the seal stop on the bottom left. |
| |
16. | Use a screwdriver to remove the door stop from the |
|
|
| door stop | ||
| bottom right of the door and refit on the bottom |
|
|
| left. |
|
|
|
|
|
|
17.Refit the seal stops, one top right the other bottom right. Push into position and secure with fixing screw.
Door Handle Reversal:
Note: This MUST be completed with the door OFF the product.
18.Remove the hole plugs from the right hand side of the door.
19.Unclip the handle
20.Unscrew the handle fixing screws and carefully remove the handle from the door.
WARNING: Take care not to dislodge the internal mechanism when removing the handle from the door.
21.Turn the handle vertically, top to bottom and place against the right hand side, position sealbreaker blade into the seal pocket.
22.Secure the handle in place with the original fixing screws, ensuring free movement of mechanism.
23.Rotate and
24.Use the hole plugs removed from the right hand side
to fill the holes on the left.
Note : You may require assistance to do this:
25.Place the top hinge onto the door, slide the door onto the bottom hinge pin and support the door whilst screwing the top hinge bracket into position.
Ensure that the top hinge bracket is positioned correctly.
26.Adjust the front feet (see ‘Levelling’ SAFETY & INSTALLATION section).
27.Fit the bottom hinge covers (see ‘Hinge Covers’ in the SAFETY & INSTALLATION section).
Note : Let the appliance stand upright in it’s final location for at least 15 minutes before plugging in and switching on the electricity supply.
16
