PRODUCT SAFETY

ATTENTION

Read your manual carefully since it contains instructions which will ensure safe installation, use and maintenance of your appliance.

Your Refrigerator is built to International safety standards (EN60) and has been awarded the European approval mark (IMQ) for compliance with UK electrical safety requirements. It also meets the EC standards on the prevention and elimi- nation of radio interference (EC directive 87/308 - 02.06.89).

1.This appliance must not be installed outdoors - not even in an area protected by a roof. It is extremely dangerous to leave it exposed to rain or storms.

2.It must only be used by adults and exclusively to refriger- ate and freeze foodstuffs, following the instructions for use contained in this manual.

3.Do not ever touch or handle the appliance with bare feet or with wet hands or feet.

4.It is highly recommended that you do not use extension cords or multiple socket adapters. If the refrigerator is in- stalled between cabinets, make sure that the cord is not bent or dangerously pinched or compressed.

5.Never pull on the cord or the refrigerator to remove the plug from the wall socket - this is very dangerous.

6.Never touch the cooling components within the appli- ance, especially with wet hands because this could result in injury.

7.Never put ice cubes just removed from the freezer into your mouth because they could stick to your mouth and cause burns.

8.Never clean the appliance or perform maintenance without first disconnecting it from the electrical mains. Turning the thermostat knob to the "OFF" setting does not suffice to break all electrical contact with the mains.

9.Before having your old refrigerator picked up for disposal, remove or make inoperable any locking devices to prevent children who might play in or around the appliance from being locked inside.

10.Before calling for service/assistance in the case of mal- function, consult the chapter entitled “TROUBLESHOOTING" to determine whether it is possible to eliminate the prob- lem. Do not try to repair the problem by trying to access the internal components of the appliance.

11.If damaged, the power supply cord on this appliance must necessarily be replaced by our service centre because special tools are required for replacement.

12.Do not use electric appliances inside the compartment for food storage, if these are not those recommended by the manufacturer.

13.At the end of the functional life of your appliance – containing cyclopentane gas in the insulation foam and perhaps gas R600a (isobutane) in the refrigeration circuit – the latter should made safe before being sent to the dump. For this operation, please contact your dealer or the Local Organisation in charge of waste disposal.

INSTALLATION

To ensure that the appliance operates properly and to re- duce energy consumption, it is important that the appliance is installed correctly.

Ventilation

The compressor and condenser generate heat and, therefore, need to be ventilated properly. Avoid placing the appliance in direct sunlight, or next to an electric stove or similar appliance. Areas not adequately ventilated are not suitable for this appliance. Therefore it should be installed in a room with an opening (eg. window) that provides the appropriate amount of air re-circulation. It is also important that the room is not too humid.

During installation, make sure not to cover or obstruct the grates that allow for proper ventilation of the appliance. For proper ventilation, you must leave:

-at least 10cm between the top of any cabinets above it.

-at least 5cm between the sides of the appliance to any adjacent cabinet/walls.

Away from Heat

Avoid positioning the appliance in a place where it is directly exposed to sunlight or near an oven, hob or the like.

Level

The appliance must be level. If the floor is not level, use the front adjustable feet to level the appliance.

Electrical Connection and Earthing

Before proceeding with the electrical connection, make sure that the voltage indicated on the rating plate, located within the fridge corresponds to the mains voltage in your home and that the socket is fitted with a standard earthing wire in accordance with safety standards for 46/90 systems. If the socket is not fitted with an earthing wire, the manufacturer will not be held liable for any damages and/or injuries aris- ing out of the use of the appliance. Do not use multiple sockets or adapters. Position the appliance in such a way that you can access the socket where it is plugged in.

Insufficient power?

The electrical socket must be able to handle the maximum power load of the appliance, which is indicated on the rating plate located within the freezer.

Before making the electrical connection ...

After the appliance has been delivered, place it in the verti- cal upright position and wait at least 3 hours before insert- ing the plug into the socket in order to ensure that it func- tions properly.

3

Page 2 Page 4
Page 3
Image 3
Hotpoint RTA 41 manual Product Safety, Installation
Page 2 Page 4

RTA 41 specifications

The Hotpoint RTA 41 is a versatile freestanding refrigerator that combines modern technology with practical features, making it a popular choice for those seeking efficient cooling solutions without compromising on style. Designed with functionality in mind, the RTA 41 offers a wide array of options to accommodate various household needs.

One of the standout features of the Hotpoint RTA 41 is its energy efficiency. The refrigerator boasts an impressive energy rating, which translates into lower electricity bills and a reduced carbon footprint. With its energy-saving settings and innovative design, this appliance not only helps you save money but also contributes positively to the environment.

The RTA 41 comes equipped with a spacious interior, providing ample storage capacity for all your fresh and frozen foods. It features adjustable shelves, allowing for customizable organization based on personal preferences and needs. The intelligent design includes a large salad crisper drawer, ensuring that fruits and vegetables stay fresh for longer periods.

Temperature control is another critical aspect of the Hotpoint RTA 41. The model is fitted with precise temperature management technology, which guarantees consistent cooling while preventing temperature fluctuations. This feature is essential for preserving the quality of your food, as it helps maintain optimal storage conditions for perishables.

The refrigerator also includes a frost-free freezer compartment that eliminates the need for manual defrosting. This convenient feature ensures that you can access frozen goods effortlessly, without the time-consuming chore of defrosting the unit.

In terms of design, the Hotpoint RTA 41 exudes a modern aesthetic with its sleek exterior and smooth finishes. The appliance is available in several colors, allowing homeowners to choose an option that best complements their kitchen decor. The easy-to-clean interior ensures that maintaining the appliance's appearance is a hassle-free task.

Additional features of the RTA 41 include adjustable door storage and a reversible door, which provides flexibility in placement depending on your kitchen layout. The model is equipped with LED lighting, illuminating the interior and making it easy to find items, even in low light conditions.

Overall, the Hotpoint RTA 41 represents a perfect blend of efficiency, style, and practicality, making it a stellar choice for any household. Whether you're storing groceries for a family or stocking up on meal prep essentials, this refrigerator is designed to meet a variety of needs while ensuring that food stays fresh and accessible.
Top Page Image Contents