Installation

 

! Before operating your new appliance, please read

GB

 

these operating instructions carefully. They contain

 

important information for safe use, installation and care

 

 

of the appliance.

 

! Please keep these operating instructions for future

 

reference. Pass them on to possible new owners of the

 

appliance.

 

Positioning and connection

Positioning

1.Place the appliance in a well-ventilated humidity-free room.

2.Do not obstruct the rear fan grills. The compressor

and condenser give off heat and require good ventilation to operate correctly and save energy.

3.Ensure the appliance is far away from any sources of heat (direct sunlight, electric stove, etc.).

Electrical connections

After transportation of the appliance, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

•The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

•The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

2

Page 1 Page 3
Page 2
Image 2
Hotpoint RTM 70 S operating instructions Installation, Positioning and connection, Electrical connections
Page 1 Page 3

RTM 70 S specifications

The Hotpoint RTM 70 S is a sophisticated refrigerator designed for those who appreciate functionality combined with a touch of elegance. This model stands out due to its sleek silver finish and contemporary design, making it a favorable addition to modern kitchens.

One of the key features of the Hotpoint RTM 70 S is its impressive energy efficiency. Rated with a high energy rating, this appliance is engineered to minimize energy consumption while maintaining optimal cooling performance. This not only helps in reducing electricity bills but also contributes to environmentally friendly practices.

Inside, the Hotpoint RTM 70 S offers a well-organized layout. The refrigerator compartment includes adjustable shelves, allowing users to customize the space according to their needs. Moreover, the spacious crisper drawers are designed to keep fruits and vegetables fresh for longer periods, ensuring that you reduce food waste. The freezer section is equally spacious, featuring ample storage space for frozen goods and an efficient freezing mechanism that quickly preserves food items.

One of the standout technologies featured in this model is the Total No Frost system. This innovation prevents the formation of ice inside the freezer, eliminating the need for manual defrosting. This not only saves time but also maintains the efficiency of the appliance over its lifespan.

Furthermore, the Hotpoint RTM 70 S is equipped with a Multi Air Flow system. This technology ensures a consistent temperature throughout the refrigerator by distributing cool air evenly in all compartments. It helps maintain the freshness of food items and enhances their shelf life.

Another significant advantage of the RTM 70 S is its quiet operation. This refrigerator operates with minimal noise, making it an ideal choice for open-concept living spaces or households that value tranquility.

In addition to practicality, this model also emphasizes ease of use. Features such as an internal LED light provide better visibility inside the refrigerator, while adjustable door bins allow for easy access to frequently used items.

Overall, the Hotpoint RTM 70 S blends innovative technology with user-friendly features, making it a reliable choice for modern households. Its design, efficiency, and advanced features contribute to a seamless kitchen experience, ensuring that food storage is both practical and stylish.
Top Page Image Contents