Hotpoint dimensions RVM1625SJ - Hotpoint Counter Saver Plus Microwave Oven

®

RVM1625SJ – Hotpoint Counter Saver Plus™ Microwave Oven

Dimensions (in inches) Optional Accessories (Available at additional cost)

66" MIN.	30"
Mounting	MIN.
height	width
from	required
floor
	12"
	MIN.

JX48BL – Black Filler

Exhaust outletPanel Kit connects to

3-1/4" X 10" duct

When replacing a 36" range hood, this kit fills in the

JX81A–

Recirculating

Charcoal Filter Kit

To be used when the Counter Saver Plus microwave oven cannot be vented to the outside.

21-3/4"

Door open

29-7/8

15-1/4

16-13/32

16

additional width to provide a custom, built-in appearance. For installation between cabinets only; not for end-of-cabinet installation. Each kit contains two, 3"-wide filler panels.

Important Information: When installing the Counter Saver Plus microwave oven over a range, allow minimum of 2" from bottom of Counter Saver Plus microwave oven to top of range backguard to allow for removal of light covers.

Installation Information: This information is not intended to be used for installing unit described. Before installing, consult installation instructions packed with product/kit for current dimensional data.

Specification Created 1/04

440017

Ventilation Options: The Counter Saver Plus microwave oven is designed for adaptation for the following three types of ventilation:

Outside Exhaust (Vertical)

Outside Exhaust (Horizontal)

Recirculating (Non-vented ductless–see Filter Kit Drawing)

Note: Before installing, consult installation instructions for current dimensional data on these three types of ventilation.

Listed by

Underwriters

RLaboratories