door stop

Maintenance

CLEANING &

MAINTENANCE

 

 

You will need a selection of small hand tools, screwdrivers, spanners etc. to carry out this procedure.

Our Service Department can arrange for an Engineer to do the conversion for you but a charge will be made.

Door Reversal

WARNING: Switch off electrical supply and pull out the mains plug.

Remove loose items/fittings from inside the fridge and place food into insulated containers whilst carrying out this operation.

1.Open the door as wide as possible.

Note : You may require assistance to do this:

2.Support the door and using a screwdriver, remove the screw securing the top hinge.

3.Carefully tilt the door to remove the hinge from the cabinet and lift the door off the bottom hinge.

4.Remove the spacing washers from the bottom hinge.

Note : You may require assistance to do this:

5.Using the packaging from the appliance or a suitable substitute to support the back of the appliance. Lay the appliance on it’s back ensuring the pipework at the back is not damaged or bent. Be careful that the appliance does not run away from you when the wheels touch the floor.

6.Unscrew the foot plate and hinge bracket fitted to the bottom right hand side of the appliance. Unscrew the foot and footplate fitted to the bottom left hand side of the appliance.

7.Refit the hinge bracket and the footplate to the opposite sides of the appliance. Screw in the feet until there is approximately 35mm projecting from the bottom front edge of the appliance.

8.Lift the appliance onto it’s feet. You may require assistance to do this: Lift the appliance from the rear of the tabletop and stand it on it’s feet and wheels. Be careful that the appliance does not run away from you when the wheels touch the floor.

9.Using a thin blunt instrument, remove the hinge bush cap from the top left of the door and refit on the top right.

10. If applicable - using a screwdriver, remove the door stop from the bottom right of the door and refit on the bottom left.

Note : You may require assistance to do this:

11.Replace the top hinge onto the door, slide the door onto the bottom hinge pin and support the door whilst screwing the top hinge into position. Ensure that the top hinge bracket is positioned correctly.

12.Adjust the front feet (see ‘Levelling’ SAFETY & INSTALLATION section).

Note : Let the appliance stand upright in it’s final location for at least 15 minutes before plugging in and switching on the electricity supply.

14

Page 14
Image 14
Hotpoint RZM36, RZA36, RZA34, RZM34 manual Maintenance, Door Reversal

RZA36, RZA34, RZM34, RZM36 specifications

Hotpoint, a renowned brand in kitchen appliances, offers a range of advanced refrigerators, including models RZM36, RZM34, RZA34, and RZA36. These models are designed to enhance kitchen efficiency while providing robust features and characteristics that cater to modern households.

The Hotpoint RZM36 is a freestanding model with a sleek design that fits seamlessly into any kitchen decor. One of its standout features is the spacious interior, providing ample storage with adjustable glass shelves that accommodate various food items. The refrigerator boasts a dedicated cooling system that maintains an optimal temperature, ensuring food freshness for a longer duration. Equipped with a reversible door, this model offers flexibility in installation, allowing users to adjust the door direction based on their kitchen layout.

Similarly, the RZM34 model offers comparable features but comes with a more compact design, making it ideal for smaller kitchens or apartments. Despite its size, it still includes a separate salad drawer, enhancing organization while keeping fruits and vegetables fresh. Energy efficiency is a hallmark across Hotpoint’s range, and the RZM34 is no exception, with an impressive energy rating that helps reduce electricity bills.

On the other hand, the Hotpoint RZA34 and RZA36 models bring additional features aimed at convenience. The RZA34 model features advanced cooling technology that minimizes temperature fluctuations, which is crucial for preserving perishable food items. This model also includes an intuitive control panel that enables users to easily manage settings and monitor energy usage.

The RZA36 takes it a step further with the integration of Smart Temperature Control technology, which adjusts cooling performance based on the surrounding environment. This feature not only enhances food preservation but also contributes to energy savings. Both RZA models feature built-in LED lighting, ensuring the interior is well-lit, making it easier to find items even in the back corners.

Overall, the Hotpoint refrigerator range, including the RZM36, RZM34, RZA34, and RZA36, exemplifies a balance of modern design, energy efficiency, and innovative technology. The versatile features across these models cater to various kitchen needs, providing reliable temperature control and ample storage solutions for any household. With Hotpoint, consumers can trust they are investing in quality appliances that enhance their culinary experiences while keeping their food fresh and organized.