Programming the cooking mode
The cooking time and/or end cooking time can be programmed after the desired cooking mode has been selected.
Programming the cooking time
Press button 5 and then adjust the cooking time by turning knob C. Press the OK button to store the setting.The tem- perature selected (which can be adjusted using knob C) and the amount of time left until cooking is complete will be displayed alternately.
Once this time is up, the word “end” will be displayed and a sequence of acoustic signals will be emitted to indicate that cooking is complete.
•Press any button to silence the acoustic signal.
•Turn knobB back to position 0 to remove the word “end” from the display.
For example
It is 9:00 a.m. and a cooking time of 1 hour and 15 minutes is programmed. Cooking will stop automatically at 10:15 a.m..
Programming the end cooking time
Press button 4 and then adjust by turning knob C. Press the OK button to store the setting. The display will remind you alternately of the temperature selected and the amount of time left until cooking is complete.
When the end cooking time selected previously is up, the word “end” will be displayed and a sequence of acoustic signals will be emitted to indicate that cooking is comple- te.
•Press any button to silence the acoustic signal.
•Turn knobB back to position 0 to remove the word “end” from the display.
For example
It is 9:00 a.m. and the end cooking time is set at 10:15 a.m.. Cooking will last 1 hour and 15 minutes.
Delayed cooking programming
Press button 5 and then adjust the cooking time by turning knob C. Press the OK button to store the setting. The tem- perature and the time set previously will be displayed alternately.
Press button 4 and then adjust the end cooking time by turning knob C. Press the OK button to store the setting and the display will remind you of the end cooking time and of the temperature set alternately.
For example
It is 9:00 a.m. and a cooking time of 1 hour and 15 minutes and 12:20 as the end cooking time are programmed. Cooking will start automatically at 11:15 a.m..
The icon A will remind you that you have programmed the cooking time and/or the end cooking time.
To cancel a programmed time
To cancel any programming you have made, set knob “B” to position “0”.
DO NOT WORRY IF
1you see ventilated air exiting the oven for a while when cooking is complete: it is due to the normal cooling phase of the oven interior;
2when using the “grill” mode, the top heating element isn’t always on (red in colour): its operation is controlled by a thermostat;
3a blast of hot steam exits the oven when you open the door during cooking;
4drops of water or steam form inside the oven if you leave food inside the oven after cooking is complete;
9
