Care and maintenance
Switching the appliance off
Disconnect your appliance from the electricity supply before carrying out any work on it.
Cleaning the appliance
• The |
parts and the rubber seals may be cleaned using |
F |
3. Grip the door on the two
external sides and close it GB approximately half way.
Unlock the door by pressing on the clamps F, then pull the door towards you, lifting it out of its slot (see diagram). To replace the door, reverse this sequence.
| a sponge that has been soaked in lukewarm water |
| and neutral soap. Use specialised products for |
| the removal of stubborn stains. After cleaning, |
| rinse and dry thoroughly. Do not use abrasive |
| powders or corrosive substances. |
• | The inside of the oven should ideally be cleaned |
| after each use, while it is still lukewarm. Use hot |
| water and detergent, then rinse well and dry with |
| a soft cloth. Do not use abrasive products. |
• | All accessories - with the exception of the sliding |
racks - can be washed like everyday crockery, and are even dishwasher safe.
Never use steam cleaners or pressure cleaners on the appliance.
Inspecting the seals
Check the door seals around the oven periodically. If the seals are damaged, please contact your nearest
Replacing the light bulb
To replace the oven light bulb:
Cleaning the oven door
Clean the glass part of the oven door using a sponge and a
For more thorough cleaning purposes, the oven door may be removed:
1. Open the oven door fully (see diagram).
1.Remove the glass cover using a screwdriver.
2.Remove the light bulb and replace it with a similar one: Wattage 15 W, cap E 14.
Replace the glass cover, making sure the seal is positioned correctly (see diagram).
F |
2.Lift up and turn the small levers located on the two hinges (see diagram).
11
