Hotpoint SHS33XK S, SD33X Cleaning the oven door, Replacing the light bulb, Inspecting the seals

Models: Hotpoint Oven

1 12
Download 12 pages 37.62 Kb
Page 10
Image 10
Cleaning the oven door

 

 

• We recommend that detergents are not sprayed directly

GB

 

onto the control panel, but that a sponge is used instead.

 

 

! Never use steam cleaners or pressure cleaners on the

 

 

 

 

appliance.

 

 

Cleaning the oven door

 

 

Clean the glass part of the oven door using a sponge and

 

 

a non-abrasive cleaning product, then dry thoroughly with

 

 

a soft cloth. Do not use rough abrasive material or sharp

 

 

metal scrapers as these could scratch the surface and cause

 

 

the glass to crack.

 

 

 

For more thorough cleaning

 

 

 

 

 

 

purposes, the oven door may be

 

 

 

removed:

 

 

 

1. Open the oven door fully (see

 

 

 

diagram).

 

 

 

 

2.Use a screwdriver to lift up and turn the small levers F located on the two hinges (see diagram).

Replacing the light bulb

To replace the oven light bulb:

1. Remove the glass cover of the lamp-holder.

2. Remove the light bulb and replace it with a similar one: Wattage 25 W, cap E 14.

3. Replace the glass cover (see diagram).

!Do not use the oven lamp as/for ambient lighting.

Side and rear catalytic liners*

These are panels coated with a special enamel, which is able to absorb the fat released by food as it cooks.

This enamel is quite strong, so that the various accessories (racks, dripping pans, etc.) can slide along them without damaging them. White marks may appear on the surfaces; these are not a cause for concern.

Nevertheless, the following should be avoided:

F

F

-scraping the enamel with sharp objects (a knife, for example);

-using detergents or abrasive materials.

3.Grip the door on the two external sides and close it approximately

 

half way. Unlock the door by

 

pressing on the clamps F, then

F

pull the door towards you lifting it

out of its seat (see diagram).

 

To replace the door, reverse this

 

sequence.

Inspecting the seals

Check the door seals around the oven regularly. If the seals are damaged, please contact your nearest Service Centre (see Assistance). We recommend that the oven is not used until the seals have been replaced.

* Only available on certain models.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

10

Page 10
Image 10
Hotpoint SHS33XK S Cleaning the oven door, Replacing the light bulb, Side and rear catalytic liners, Inspecting the seals