Hotpoint sx 898 cx s manual Practical cooking advice, Setting the end time for a cooking mode

Models: sx898 ck s sx898 cw s sx 898 cx s

1 16
Download 16 pages 39.12 Kb
Page 9
Image 9
Setting the end time for a cooking mode

2.Turn the TIMER knob towards “Practical cooking advice” and “ ” to adjust the time as desired; keep the knob in position to scroll through the numbers more quickly and make the setting process easier.

3.Once you have reached the desired duration, press the

Manual background button again. The display will show the duration and set temperature alternately.

4.Press the Manual background button to begin cooking.

5.When cooking has finished, “END” appears on the display and a buzzer sounds.

• For example: it is 9:00 a.m. and a duration of 1 hour and

15 minutes is programmed. The programme will stop automatically at 10:15 a.m.

Setting the end time for a cooking mode

!A cooking duration must be set before the cooking end time can be scheduled.

!For the delayed programming to work properly, the clock should be set to the correct time.

1.Follow steps 1 to 3 to set the duration as detailed above.

2.Press the Manual background button twice: the Manual background icon and the numerical digits on the display will begin to flash.

3.Turn the TIMER knob towards “Manual background” and “ ” to adjust the cooking end time value.

4.Once you have reached the desired end time, press the

Manual background button again. The display will show the duration, the cooking end time and the set temperature alternately.

5. Press the Manual background button to activate the programmed mode.

Programming has been set when the Manual background and Manual background buttons are illuminated. The DISPLAY shows the cooking end time and the cooking duration alternately.

6.Once cooking has finished, “END” appears on the display and a buzzer sounds.

• For example: it is 9:00 a.m. and a time of 1 hour and

15 minutes is programmed, while the end time is set to 12:30. The programme will start automatically at 11:15 a.m.

To cancel programming press the Manual background button.

Practical cooking advice

!Do not place racks in position 1 and 5 during fan-assisted cooking. This is because excessive direct heat can burn temperature sensitive foods.

!In the GRILL and FAN GRILLING cooking modes, particularly when using the rotisserie spit, place the dripping pan in position 1 to collect cooking residues (fat and/or grease).

MULTILEVEL

Use positions 2 and 4, placing the food which requires more heat on 2.

Place the dripping pan on the bottom and the rack on top.

GRILL

GB

Place the rack in position 3 or 4. Position the food in the centre of the rack.

We recommend that the temperature is set to its maximum level. The top heating element is regulated by a thermostat and may not always operate constantly.

PIZZA

Use a lightweight aluminium pizza pan. Place it on the rack provided.

For a crispy crust, do not use the dripping pan as this extends the total cooking duration and prevents the crust from forming.

If the pizza has a lot of toppings, we recommend adding the mozzarella cheese to the top of the pizza halfway through the cooking process.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

9

Page 9
Image 9
Hotpoint sx 898 cx s, sx898 cw s, sx898 ck s manual Practical cooking advice, Setting the end time for a cooking mode