Care and maintenance
| Cutting off the water and electri- | |
GB | ||
city supplies | ||
| ||
| • Turn off the water tap after every wash cycle. | |
| This will limit wear on the hydraulic system | |
| inside the | |
| leaks. | |
| • Unplug the | |
| and during all maintenance work. | |
| Cleaning the |
•The outer parts and rubber components of the appliance can be cleaned using a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.
•The
To help the wash cycle you may want to use either the detergent (i.e. a quantity 10% the quantity specified for
A | B | To start the program- | |
me press buttons A | |||
|
| ||
|
| and B simultaneously | |
|
| for 5 seconds (see |
figure).
The programme will start automatically and will run for about 70 minutes. To stop the cycle press the START/PAUSE button.
Cleaning the detergent dispenser drawer
Cleaning the pump
The
!Make sure the wash cycle has finished and unplug the appliance.
To access the
1. using a screwdri- ver, remove the cover panel on the lower front part of the
figure);
2. unscrew the lid by rotating it anti- clockwise (see figu- re): a little water may trickle out. This is perfectly normal;
3. clean the inside thoroughly; |
4. screw the lid back on; |
5. reposition the panel, making sure the hooks |
are securely in place before you push it onto |
the appliance. |
1 |
2 |
Remove the dispen- ser by raising it and pulling it out (see
figure).
Wash it under running water; this operation should be repeated frequently.
Checking the water inlet hose
Check the inlet hose at least once a year. If there are any cracks, it should be replaced immediately: during the wash cycles, water pressure is very strong and a cracked hose could easily split open.
Caring for the door and drum of your appliance
•Always leave the porthole door ajar in order to prevent unpleasant odours from forming.
!Never use
6