STEP 5 | Using your Machine |
|
|
WARNINGS:
●In the unlikely event of something not working, see ‘Troubleshooting’ STEP 8.
Programme listing | Option buttons Door Locked indicator light Progress indicator lights |
Digital Display
‘On/Off’ button
‘Start/Cancel’ button
Variable Temperature button Variable Spin Speed button Programme selector dial
On-Off / Selecting a programme...
The machine is switched on by pressing the ‘On/Off’ button for 2 seconds. All the indicator lights will light up for a few seconds and the ‘Door Locked’ indicator light will flash once.
Turn the programme selector dial to the desired programme. Load the laundry and detergent. Select the options you require. Press the ‘Start/Cancel’ button for 2 seconds to start the programme.
To stop or change a programme...
Press the ‘Start/Cancel’ button for 2 seconds. Select ‘Pump Out’ on the programme selector dial.
When the machine has finished emptying, turn the programme selector dial to the new programme (you may need to add detergent). Press the ‘Start/Cancel’ button to start the programme.
●If you cancel a hot wash programme, take care when removing the laundry, it might still be very hot.
Progress indicator lights...
These will light up when you choose a programme, to indicate the progress of the selected programme. When started, the first light in the cycle will stay lit and as the programme
progresses, successive lights will come on until the programme finishes.
During a wash programme the display will show the time remaining to the end of the programme.
Door Locked indicator light...
●The ‘Door Locked’ indicator light will come on two seconds after you press the ‘Start/Cancel’ button and will stay lit throughout the programme. A short time after the programme has finished the indicator light will go out and you can then open the door.
●Selected programmes will not start if the door is not closed properly, the ‘Door Locked’ indicator light will flash to show this. The display will also show the word ‘door’.
Push the door shut until you hear the catch click.
The machine will show on the display if there is a problem:
H20 A problem with the water supply.
Check that the taps are turned on and working.
door Please close the machine door properly.
F000 Indicates a machine fault.
Please note the number shown and refer to STEP8
