
QuickSpecs
Compaq 100eu SFF PC (EMEA only)
System Details
Power Conservation | APM 1.2 support |
|
|
|
'Energy Saver' | Screen blanking |
|
|
|
| Hard drive 'Idle' mode |
|
| |
| System Idle mode |
|
|
|
| ~2 watt power consumption in ES mode - suspend to RAM (S3) (instantly available PC) | |||
| Processor/Cache memory |
|
| |
| Eup Lot 6 - less than 1W with BIOS setup option (Max power savings) | |||
|
|
| ||
System Environmental | Values are subject to change without notification and are for reference only. | |||
Specs | Performance of system, options, and ancillary equipment will vary depending on the system | |||
| configuration. |
|
|
|
| Levels presented do not account for | |||
| Ambient Air | Operating | 32° to 104°F (0° to 40°C) at sea level with an | |
| Temperature |
| altitude | |
|
|
| (300 m) above sea level to a maximum of | |
|
|
| 8000 ft (2500 m), no direct sustained sunlight. | |
|
|
| Maximum rate of change is 77°F/Hr (25°C/Hr). | |
|
|
| The upper limit may be limited by the type and | |
|
|
| number of options installed. | |
|
| Storage | ||
|
|
| Maximum rate of change: 410°F/Hr | |
|
|
| (210°C/Hr). | |
| Humidity | Operating | 10% to 90% relative humidity (Rh), 86°F | |
|
|
| (30°C) maximum wet bulb temperature, non- | |
|
|
| condensing. | |
|
| Storage | 10% to 95% relative humidity (Rh), 101.66°F | |
|
|
| (38.7°C) maximum wet bulb temperature, | |
|
|
| ||
| Altitude | Operating | 0 to 10,000 feet (0 to 3048 meters) - This | |
|
|
| value may be limited by the type and number | |
|
|
| of options installed. Maximum allowable | |
|
|
| altitude change rate is 1,000 ft/min (304.8 | |
|
|
| m/min). | |
|
|
| 0 to 30,000 feet (0 to 9,144 meters) - | |
|
|
| Maximum allowable altitude change rate is | |
|
|
| 1200 ft/min (365.76 m/min). | |
| Shock | Listed are the levels of shock the product can withstand with NO | ||
|
| damage being incurred. The values represent peak input acceleration | ||
|
| during a 2 to 3 ms | ||
|
|
| 35G's | |
|
|
| 35G's (Trapezoidal Shock) | |
| Vibration | Listed are the levels of vibration the product can withstand with NO | ||
|
| damage being incurred. The values represent a flat random vibration | ||
|
| input acceleration profile across the given frequency range. | ||
|
| Operating | Random vibration at 5Hz@0.00025G²/Hz, | |
|
|
| 10Hz@0.01G²/Hz, 100Hz@0.01G²/Hz, | |
|
|
| 300Hz@0.00001G²/Hz | |
|
|
| 5Hz to 300Hz, (0.25G's nominal). | |
|
|
| Random vibration at 0.008G²/Hz, | |
|
|
| 10Hz to 500Hz, (2 Grms nominal). | |
|
|
|
|
|
DA - 13687 Worldwide QuickSpecs — Version 2 — 6.23.2010 | Page 6 |