HP Armada 110 Integrating NIC Drivers, C & T Video, ATI, S3 Video, Specific Errata, General Process

Compaq Guide to PC Deployment	6
	Preliminary

For example, change:

[SourceDiskNames]

1 = %LT.disk%, , 0001

to

[SourceDiskNames]

1 = %LT.disk%,,,c:\windows\system\precopy

4.Copy the driver’s installation INF (named in the Errata) from the driver’s directory to N:\WIN9

5.The video driver is now integrated into the Windows 95 installation share.

Specific Errata

C & T Video

•Currently C&T Video isn't supported for MSBatch Installation.

ATI

•Use MACXW4.INF as the installation INF.

S3 Video

•Use S3VMX.INF as the installation INF.

Integrating NIC Drivers

General Process

1.Download each required SoftPAQ to its own directory (under the N:\WIN95 directory) named for the contents (ex: N:\WIN95\ATI\ for the ATI Technologies video drivers) and execute the SoftPAQ. This will lay out the files in a directory structure specified by the SoftPAQ.

2.If there are DISKx subdirectories move the contents down one level. For Example ATI\DISK1 would move to ATI\.

3.Edit the [SourceDisksFiles] section in the driver’s installation INF (named in the Errata) to add the subdirectory name to all of the files listed. For example, for DIAMOND change:

For example, change: [SourceDiskNames]

1= %LT.disk%, , 0001 to [SourceDiskNames]

1= %LT.disk%,,,c:\windows\system\precopy

4.Copy the driver’s installation INF (named in the Errata) from the driver’s directory to N:\WIN95.

PRT/007A/0699