setup guide
1 unpack your printer
Printer
Software and Printer
Help on CD
Setup Guide
hp photosmart
130
Print cartridge
HP #57
Sample index cards
Sample photo paper
Power adapter
Photo Printing Guide | Software Setup & Product |
| Support booklet |
2 connect the power adapter
Make sure you place the printer at least 10 inches away
from a wall or any obstuction to allow space for the paper
1 to move during printing.
1. Insert the round end of the power adapter into the |
|
power adapter connection on the back of your printer. | 2 |
2. Plug the power adapter into a working electrical outlet.
Important: Make sure the power adapter cord does not | Rear paper path | |
block the rear paper path. | ||
|
3 load an index card in the paper tray
Note: The index card will be used to print a calibration page in step 5.
1. Open the paper tray door.
2. Place an index card from the sample pack on the paper tray and slide the ard underneath the output guide.
3. Move the paper width guide to fit close to the left | reverse page to continue |
edge of the index card without bending it. | Output guide |
| |
| Paper width guide |