Safety Precautions

To avoid personal injury or product damage when installing your switch, read the installation precautions and guidelines below.

Installation Precautions

Warnings

■The rack or cabinet should be adequately secured to prevent it from becoming unstable, tilting or falling.

Devices installed in a rack or cabinet should be mounted as low as possible, with the heaviest devices at the bottom and progressively lighter devices above.

■Do not wall-mount any switch without checking for restrictions in the Installation and Getting Started Guide.

Wall-mount the switch with network ports facing up or down (away from or toward the floor). Do not wall-mount the switch with the ventilation or fan ducts facing up or down.

Cautions

■If your installation requires a different power cord than the one supplied with the switch and/or power supply, be sure the cord is adequately sized for the switch’s current requirements. In addition, be sure to use a power cord displaying the mark of the safety agency that defines the regulations for power cords in your country/region. The mark is your assurance that the power cord can be used safely with the switch and power supply.

■When installing the switch, the AC outlet should be near the switch and should be easily accessible in case the switch must be powered off.

■Ensure the switch does not overload the power circuits, wiring, and over-current protection. To determine the possibility of overloading the supply circuits, add together the ampere ratings of all devices installed on the same circuit as the switch and compare the total with the rating limit for the circuit. The maximum ampere ratings are usually printed on the devices near the AC power connectors.

■Do not install the switch in an environment where the operating ambient temperature exceeds its specification.

■Ensure the air flow around the switch is not restricted. Leave at least 7.6 cm (3 inches) for cooling. For other available air flow information, see the Installation and Getting Started Guide for your product, located on the HP ProCurve Web site at www.hp.com/go/procurve/manuals.

For additional Safety and Regulatory information, refer to the Safety and Regulatory documentation included with your switch.

3

Page 2 Page 4
Page 3
Image 3
HP 1410-16G manual Safety Precautions, Installation Precautions
Page 2 Page 4

1410-16G specifications

The HP 1410-16G is a versatile and efficient managed switch designed for small to medium-sized businesses that need reliable performance and easy network management. Part of HP's 1410 series, this switch provides 16 Gigabit Ethernet ports, allowing for fast data transfer speeds and increased bandwidth for connected devices.

One of the main features of the HP 1410-16G is its plug-and-play functionality, enabling users to set up a network with minimal configuration. This ensures that even those with limited technical knowledge can quickly deploy the switch and have their devices connected and communicating without hassle. The user-friendly web interface allows for straightforward management of the switch, making it easy to monitor network performance, configure settings, and troubleshoot issues.

The HP 1410-16G supports a range of technologies that enhance network performance and ensure reliability. Among these is Energy Efficient Ethernet (EEE), which helps reduce energy consumption during periods of low data activity, making it an environmentally friendly option. Additionally, the switch employs auto-negotiation capabilities, automatically adjusting the speed and duplex settings with connected devices to optimize performance.

Port-based VLAN support is another significant characteristic of the HP 1410-16G. This feature allows network administrators to segment traffic, improving security and performance by isolating different types of data. Furthermore, the switch supports Quality of Service (QoS), enabling prioritization of network traffic for voice and video applications, ensuring that these critical services receive the bandwidth they require, especially in a busy network environment.

The HP 1410-16G is built with durability in mind, featuring a fanless design that reduces noise and ensures reliable operation over long periods. Its compact form factor makes it suitable for various installations, whether in a wiring closet or on a desktop.

With a warranty and reliable support from HP, the 1410-16G proves to be a solid investment for businesses looking to enhance their networking capabilities. Overall, its combination of performance, ease of use, and advanced features makes it an excellent choice for those looking to upgrade their network infrastructure.
Top Page Image Contents