4.Remove the battery (see Battery on page 55).

5.Remove the following components:

a.Bottom door (see Bottom door on page 58).

b.Keyboard (see Keyboard on page 70)

c.Heat shield (see Heat shield on page 73)

d.Fan (see Fan on page 75)

e.Heat sink (see Heat sink on page 77) Remove the processor:

1.Position the computer upside-down.

2.Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise until you hear a click.

3.Lift the processor (2) straight up and remove it.

NOTE: The gold triangle (3) on the processor must be aligned with the triangle embossed on the processor slot when you install the processor.

Reverse this procedure to install the processor.

Component replacement procedures 81