5Removal and replacement procedures

CAUTION: Components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the tablet and void the warranty.

NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions.

This chapter provides removal and replacement procedures for authorized service provider only parts.

There are as many as 19 screws that must be removed, replaced, and/or loosened when servicing the tablet. Make special note of each screw size and location during removal and replacement.

Back cover

Description

Spare part number

 

 

Back cover (includes shielding):

 

 

 

For use only on HP Pro Tablet 610 tablet models

763533-001

 

 

For use only on HP Omni 10 tablet models

739813-001

 

 

10.1-in, AG, LED, WUXGA, TouchScreen, display assembly

 

NOTE: The display assembly does not include the display panel cable. The display panel cable is available using spare part number 739817-001.

For use only on HP Pro Tablet 610 tablet models

763536-001

 

 

For use only on HP Omni 10 tablet models

739812-001

 

 

Before disassembling the tablet, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

20

Chapter 5 Removal and replacement procedures