Connecting the Power Cable

1.Follow all electrical and power warnings:

WARNING! To reduce the risk of electric shock or damage to your equipment:

Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet.

Be sure that the grounded power outlet you plug the power cord into is easily accessible to the operator and located as close to the equipment as possible. A power cord should be routed so that it is not likely to be walked on or pinched by items that are placed upon it or against it.

Do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable.

See Technical Specifications on page 31 (Appendix B) for additional information.

Figure 3-11Connecting the power cable

2.Connect one end of the power cable to the monitor and the other end to a grounded electrical outlet.

WARNING! To prevent injury from electrical shock, you should do one of the following if a properly grounded electrical outlet is not available: (1) You should use an electrical outlet adapter that provides proper grounding. (2) You should have a properly grounded electrical outlet installed.

Adjusting The Tilt

For optimal viewing, adjust the screen tilt to your own preference, as follows:

1.Face the front of the monitor and hold the base so that you do not topple the monitor while changing the tilt.

14 Chapter 3 Setting Up the Monitor