●Personal Area Network (PAN)

●Serial Port Profile (SPP)

●Service Discovery Protocol (SDP)

Create, end, and accept a Bluetooth partnership

You can exchange information between your HP iPAQ and another device that has Bluetooth capabilities. For this, you will have to first create a Bluetooth partnership between the two devices.

NOTE: To exchange information between two Bluetooth enabled devices, make sure Bluetooth is turned on both devices. The devices should be in the discoverable mode.

To create partnership:

1.Make sure the two devices are turned on, discoverable, and within close range.

2.Tap Start > Settings > Connections > Bluetooth.

3.Tap Bluetooth Manager > New > Explore a Bluetooth device. Your HP iPAQ searches for other devices with Bluetooth capabilities and displays them in the list.

4.Select the service you want to use from the Service Selection list, and then tap Next.

5.In Security, if you want to use a secure, encrypted connection (recommended for enhanced security), select the Use a secure, encrypted connection check box, and then tap Next. Otherwise, leave the Security field blank, and then tap Next.

6.Enter the same passkey on the other device.

7.Tap Finish.

8.To give the partnership a more meaningful name, tap and hold the device name under My Shortcuts, and then tap Rename.

To end a Bluetooth partnership:

1.Tap Start > Settings > Connections > Bluetooth > Bluetooth Manager.

2.Tap and hold the partnership you want to end.

3.Tap Delete, and then tap Yes.

To accept a Bluetooth partnership:

1.Make sure your device is turned on, discoverable, and within close range.

2.When prompted to accept a partnership with the device that is requesting the relationship, tap OK.

3.If a passkey is requested, enter an alphanumeric passkey between 1 and 16 characters in the Passkey box, and then tap OK. Enter the same passkey in the device requesting the partnership. Using a passkey provides greater security.

4.Tap Finish.

If you cannot discover another device, try the following:

●Make sure Bluetooth is turned on.

●Move the devices closer to each other.

●Make sure the device you are attempting to connect to is switched on and is in the discoverable mode.

Bluetooth 23