![](/images/backgrounds/289840/hp-omni-220-1125-desktop-pc-users-manual-1498065x1.png)
1Preparing your HP computer for wall- mounting
This document provides instructions for computer
Should you decide to switch your computer back from a
What you need
●A Phillips screwdriver
●A stable flat surface covered with a soft, clean cloth (such as a clean, large towel) to protect the computer when you place it face down.
●Another person (it might require two people to lift and move the computer)
●Antistatic wrist strap and a conductive foam pad to stand on while working on the computer (recommended)
●
◦VESA standard 100 mm x 100 mm (3.9 in x 3.9 in) hole pattern
◦Designed for
Safety information
This product has not been evaluated for connection to an “IT” power system (an AC distribution system with no direct connection to the earth, according to IEC 60950).
WARNING! Please read “Additional Safety Information” in the Limited Warranty and Support Guide before installing and connecting your system to the electrical power system.
WARNING! The computer is heavy. Take proper precautions when lifting or moving your computer.
WARNING! Always disconnect the computer from the power source before removing the computer stand. Failure to do so before you perform any procedures can result in personal injury or equipment damage.
WARNING! Avoid touching sharp edges inside the computer.
What you need | 1 |