Icon

Main Menu Options

Sub-menu Options

Description

 

 

 

 

 

Source Control

 

Selects the video input signal. the

 

 

 

factory default by priority is DisplayPort,

 

 

 

DVI, then HDMI.

 

 

 

 

 

 

DVI

Selects DVI as the video input signal.

 

 

 

 

 

 

HDMI (2310e model)

Selects HDMI as the video input signal.

 

 

 

 

 

 

DisplayPort

Selects DisplayPort as the video input

 

 

 

signal.

 

 

 

 

 

 

Default Source

Selects the default or primary video

 

 

 

input signal when the monitor is

 

 

 

connected to two active and valid video

 

 

 

sources. The monitor will automatically

 

 

 

determine the video format.

 

 

 

 

 

 

Auto Switch Source

Turns the system's automatic video

 

 

 

signal input to On or Off. The factory

 

 

 

default is On.

 

 

 

 

 

 

Source Detection

This option is displayed in the OSD

 

 

 

when a DisplayPort input is selected.

 

 

 

You can set Source Detection to:

 

 

 

●

Always Active

 

 

 

●

Low Power

 

 

 

The factory default is Low Power.

 

 

 

 

 

Exit

 

Exits the OSD menu screen.

 

 

 

 

 

Identifying Monitor Conditions

Special messages appear on the monitor screen for the following monitor conditions:

●Monitor Status—When the monitor is powered on or when the input source signal is changed, a Monitor Status message is displayed for five seconds. The message shows which input is the current active signal, the status of the auto-switch source setting (On or Off), the default source signal, the current preset display resolution, and the recommended preset display resolution.

●Input Signal Out of Range — Indicates the monitor does not support the video card's input signal because its resolution or refresh rate are set higher than the monitor supports.

Change your video card settings to a lower resolution or refresh rate. Restart your computer for the new settings to take effect.

●Power Button Lockout— Indicates the power button is locked. If the power button is locked, the warning message Power Button Lockout displays.

If the power button is locked, press and hold the power button for 10 seconds to unlock the power button function.

If the power button is unlocked, press and hold the power button for 10 seconds to lock out the power button function.

●Monitor Going to Sleep — Indicates the screen display is entering a sleep mode.

ENWW

Identifying Monitor Conditions 19