2.2 Connect your monitor to your computer

1.Power off and unplug your computer.

2.Connect the 15-Pin ends of the signal cable to the VGA port of your monitor and the VGA OUT jack on the back of your computer. Secure the screws on both ends of the signal cable.

3.Connect the round end of power adapter to the monitor, then connect one end of the power cords to the power adapter and the other end to the nearest electrical outlet.

4.Power on your computer and monitor. If your monitor displays an image, the installation has been successfully done. If the monitor does not display any image, check all the connections.

Cautions: 1. For installation, please complete signal cord connection before plugging the power cord into the electrical outlet to avoid damaging the monitor.

2.During installation, please support the front frame with your hand at its center of gravity to avoid dropping and damaging the monitor.

Overview of the ports of the monitor:

1.DC power supply input

2.DVI signal input

3.VGA signal input

4