Manuals / Brands / Computer Equipment / All in One Printer / HP / Computer Equipment / All in One Printer

HP ProCurve 7Connect the power cord and adapter, 8Connect the supplied phone cord, Press the On button

Models: 2610v 2610xi 2613 2610

1 12

Download 12 pages, 4.35 Mb

7Connect the power cord and adapter

USB cable users: Do NOT connect the USB cable until this guide instructs you to or the software may not install properly.

8Connect the supplied phone cord

Connect one end of the supplied phone cord to the phone port on the left (1-LINE)and the other to a wall jack.

To connect an answering machine, see the Fax Setup chapter in the User Guide. To use a different phone cord, see the Troubleshooting Information chapter in the User Guide.

Press the On button

a After you press the On button, the green light ﬂashes, and then becomes solid. This may take up to a minute.

b Wait for the print cartridge prompt before continuing.

3 • HP all-in-one

Contents

2Remove all tape 3Locate components 4Attach the control-paneloverlay (if not attached) 5Lift the color graphics display 6Load plain white paper 7Connect the power cord and adapter 8Connect the supplied phone cord Press the On button 10Open access door 11Remove tape from both cartridges 12Insert the tri-colorprint cartridge 13Insert the black print cartridge 14Align the print cartridges 15Turn on your computer 16Choose ONE connection type (A or B) A: USB Connection B: Ethernet (Wired) Network Section A: USB connection A1 Insert the correct CD A2 Connect the USB cable A3 Go to step 17 on page Section B: Ethernet (Wired) Network Connect the Ethernet cable B2 Choose the correct CD 17Congratulations 18Set up additional computers (optional) Troubleshooting