2Reinstalling the stand on the computer
To convert the computer from a
What you need
●A stable, flat surface to place the computer
●A soft, clean cloth (such as a clean, large towel) to protect the computer when you place it face down
●Antistatic wrist strap and conductive foam pad to stand on while working on the computer (recommended)
●A Phillips #2 screwdriver
●Another person (the computer is heavy and might require two people to lift and move it)
Safety information
This product has not been evaluated for connection to an “IT” power system (an AC distribution system with no direct connection to the earth, according to IEC 60950).
WARNING! Always disconnect the computer from the power source before removing the computer stand. Failure to do so before you perform any procedures can result in personal injury or equipment damage.
WARNING! Avoid touching sharp edges inside the computer.
WARNING! The computer is heavy. Take proper precautions when lifting or moving the computer.
WARNING! Please read “Additional Safety Information” in the Limited Warranty and Support Guide before installing and connecting your system to the electrical power system.
What you need | 9 |