x64 (SP1), download SNP and required Microsoft hotfixes and install them on the system. See the Microsoft (http://www.microsoft.com) website to download the latest version of the Microsoft Windows Server 2003 Scalable Networking Pack (SNP) and required Microsoft Windows Server 2003 (SP1) hotfixes in article numbers 921136, 919948, and 923187 of the Microsoft Knowledge Base (KB). These Microsoft hotfixes are required only for Windows Server 2003 (SP1) and Windows Server 2003 x64 (SP1).
Team configuration properties
Team configuration properties that are configured on the target server include:
•TeamName—Determines the unique identifier for the adapter team. Each team name on the target system must be unique.
•OpMode—Determines the operating mode of the team. Possible values are Auto, DynamicSingleSlb, StaticSingleSlb, TransmitLoadBalancing, TLBwithPref, FailOnFault, PrefPrimary
•LoadBalAlgorithm—Determines the team load balancing algorithm. Possible values are MACAddress, IPAddress, TCPConnection, RoundRobin, and Auto.
•TeamNetworkAddress—Establishes the MAC address for the adapter team. A null value is always written to the XML data file because locally administered addresses must be unique. A null value is valid and computes a default address. This value must be a valid unicast address if it is edited.
•TxPathValidationMode—Enables or disables the packet signal transmitted between the teamed adapters. Possible values are Enabled or Disabled.
•RxPathValidationMode—Enables or disables the packet signal received between the teamed adapters. Possible values are Enabled or Disabled.
•TxPathValidationInterval—Determines how frequently the packet signals are transmitted. The range of acceptable values is 3 to 60. Values less than 3 are set to 3, and values greater than 60 are set to 60.
•RxPathValidationInterval—Determines how frequently the packet signals are received. The range of acceptable values is 3 to 60. Values less than 3 are set to 3, and values greater than 60 are set to 60.
•RxPathValidationVlanId—Determines the VLAN on which Receive Path Validation packet frames are transmitted. This value is only written when a VLAN is defined for the team. The default is the VLAN on the team with the lowest VLAN ID at the time the team is created.
•DefaultVlanId—Determines the VLAN ID used for any un-tagged packets received by the team. This property only applies to teams that have VLANs defined.
•TOEEnabled—Enables the offloading of TCP connections to the Multifunction Server Adapter. Microsoft Scalable Networking Pack (SNP) is required when enabling TOE and is included on systems running Windows Server 2003 (SP2) or Windows Server 2003 x64 (SP2). SNP also is supported, but not included, on systems running Windows Server 2003 (SP1) and Windows Server 2003 x64 (SP1). To enable TOE adapter functionality on a system running Windows Server 2003 (SP1) or Windows Server 2003 x64 (SP1), you must download SNP and required Microsoft hotfixes and install them on the system. See the Microsoft (http://www.microsoft.com) website to download the latest version of the Microsoft Windows Server 2003 Scalable Networking Pack (SNP) and required Microsoft Windows Server 2003 (SP1) hotfixes in article numbers 921136, 919948, and 923187 of the Microsoft Knowledge Base (KB). These Microsoft hotfixes are required only for Windows Server 2003 (SP1) and Windows Server 2003 x64 (SP1). The TOEEnabled property is
Configuration properties 12
