5 Remove carriage restraints (continued)

ËRemove the plastic spacers from the rail, behind the carriage (2 upper and 1 lower).

Upper spacer (1 of 2)

Lower spacer

ÌCarefully move the carriage to the left, unscrew the plates from the platen with the hex key, and remove.

When the control panel prompts you to load media, press Cancel.

Wearing the included protective gloves, remove the ink blotter pad and plastic wrap from the platen (under the carriage). Place gloves and shipping packaging in plastic bag, and discard.

7 Load roll-fed media

1.Remove the media roll from its packaging.

2.Load the media roll onto the supply spool.

3.Load the supply spool onto the printer (unroll from the top of the spool).

4.Unspool the media onto the platen.

5.Press the Load Media key on the control panel.

6.Follow the onscreen instructions.

8 Fill printheads with ink and prime

1.On the Front Page screen, press the Tools key, then select Maintenance > Printhead Procedures > Load Ink in All Heads. Wait for the load process to finish.

2.On the Front Page screen, press the Prime Bars key.

6 Install ink and profilers

9 Connect the RIP and print

Open each ink box, pull out ink supply tube, remove profiler. Install the ink boxes into the wire rack and profilers into the docking station as indicated by the labels on the printer.

Install the RIP and connect it to the printer. Refer to the RIP documentation for instructions. The computer running the RIP can be stored on the shelf in the rear of the printer.

Install profilers

Filter

Push connector into port

Ink connection ports, below ink boxes

Printer supports four or six colors, depending on model

10 If you have questions...

See: User Manual

Press ? on the printer control panel for quick help

For service and support in North America: 800.925.0563

Outside North America: +1 952.944.4040

En Español: +1 952.943.3627

E-mail: cs.support@hp.com

Web: www.colorspan.com

or contact your reseller

© Copyright 2007 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Printed in the US

www.hp.com

www.colorspan.com

Revision A

0706479