QuickSpecs

HP Compaq Pro 4300 Small Form Factor Business PC

Technical Specifications – Power

Unit Environment and Operating Conditions

General Unit Operating Guidelines

Keep the computer away from excessive moisture, direct moisture and the extremes of heat and cold, to ensure that unit is operated within the specified operating range.

Leave a 10.2 cm (4 in) clearance on all vented sides of the computer to permit the required airflow. Never restrict airflow into the computer by blocking any vents or air intakes.

Do not stack computers on top of each other or place computers so near each other that they are subject to each other's recirculated or preheated air.

Occasionally clean the air vents on the front, back, and any other vented side of the computer. Lint, dust and other foreign matter can block the vents and limit the airflow.

If the computer is to be operated within a separate enclosure, intake and exhaust ventilation must be provided on the enclosure, and the same operating guidelines listed above will still apply.

Temperature Range

Operating: 50° to 95° F (10° to 35° C)*

 

Non-operating: –22° to 140° F(–30° to 60° C)

Relative Humidity

Operating: 10% to 90% (non-condensing at ambient)

 

Non-operating: 5% to 95% (non-condensing at ambient)

Maximum Altitude

Operating: 10,000 ft (3048 m)

(unpressurized)

Non-operating: 30,000 ft (9144 m)

*Operating temperature is de-rated 1.0 deg C per 300 m (1000 ft) to 3000 m (10,000 ft) above sea level, no direct sustained sunlight. Maximum rate of change is 10 deg C/Hr. The upper limit may be limited by the type and number of options installed.

Power Supply

Standard Efficiency

240W active PFC

 

 

70% @ 100% load

 

High Efficiency

240W active PFC

 

 

82/85/82% @ 20/50/100% load

 

Max Power Rating

240W

 

Power Factor Correcting (PFC)

Active

 

Rated Line Frequency

50/60 Hz

 

Operating Line Frequency

47 – 63 Hz

 

Range

 

 

Maximum Voltage Range

115 VAC:

90 - 140 VAC

 

220VAC:

180 - 264 VAC

Nominal Voltage Range

115 VAC:

100 - 127 VAC

 

220VAC:

200 - 240 VAC

Rated Input Current

=4A

 

Maximum allowable leakage

275 µA

 

Current (NFPA 99)

 

 

Power Supply Fan

92mm variable speed

 

*High efficiency power supply is a requirement for ENERGY STAR qualification in conjunction with a select range of processors and modules

DA - 14288 North America — Version 22 — December 16, 2013

Page 49