HP 4310S manual HP ProBook 4310s Notebook PC Technical Specifications5, Fast

QuickSpecs

HP ProBook 4310s Notebook PC

Technical Specifications5.

supplier IHV extensions required for Cisco Compatible Extensions support for Microsoft Windows Vista.

Intel WiFi Link 1000 Wireless LAN StandardsIEEE 802.11b

IEEE 802.11g

IEEE 802.11n (draft 2.0)*

	* The specifications for 802.11n draft 2.0 are draft specifications and are
	not final. If the final specifications differ from the draft specifications, it may
	affect the ability of the notebook to communicate with other 802.11n WLAN
	devices. In countries where n draft 2.0 is not allowed, this capability is not
	enabled.
Interoperability	Wi-Fi certified
	Cisco Compatible Extensions Program compliant with Microsoft Windows
	Vista and XP (details at: http://www.hp.com/go/notebooks/WLAN)
Frequency Band	2.4 GHz
Antenna Structure	1 transmit; 2 receive (1x2)
Data Rates	802.11b: 1, 2, 5.5, 11 Mbps
	802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
	802.11n (draft): many possible data rates, ranging from 6 Mbps to 300
	Mbps, depending on the combination of Bandwidth, Modulation Coding
	Scheme, and Guard Interval used, as defined in IEEE 802.11n (draft)
	specification
Modulation	Direct Sequence Spread Spectrum
	DBPSK, DQPSK, CCK, OFDM, BPSK, QPSK, 16-QAM, 64-QAM
Security1	Authentication: WPA and WPA2, 802.1x (EAP_TLS, TTLS, PEAP, LEAP, EAP-
	FAST)
	Authentication Protocols: PAP, CHAP, TLS, GTC, MS-CHAP, MS-CHAPv2
	Encryption: 64 and 128-bit WEP, AES-CCMP, CKIP, TKIP
	Support for Cisco Security Features (proven compatibility with Cisco Aironet
	infrastructure products through the Cisco Compatible Extensions Program
	Version 4) with Microsoft Windows Vista and XP only.
Sub-channels	Multinational support with frequency bands and channels compliant to local
	regulations.
Media Access Protocol CSMA/CA (Collision Avoidance) with ACK
Network Architecture	Ad-hoc (Peer to Peer)
Models	Infrastructure (Access Point Required)
Roaming	IEEE 802.11 compliant roaming between 2.4GHz band Access Points
Output Power (for CCK	15 dBm typical
and OFDM)2
Power Consumption	Transmit: 1.4 Watts (average, with one spatial streams)
	Receive: 1.3 Watts (average with two receive chains)
	Idle mode3: 30 mW (average)
	Radio off: 20 mW (max)
Power Management	ACPI compliant power management
	802.11 compliant power saving mode
Receiver Sensitivity4	54 Mbps: -74 dBm, 6 Mbps: -91 dBm

DA - 13354 Worldwide QuickSpecs — Version 6 — 9.28.2009 Page 29