QuickSpecs
HP ProBook 4330s Notebook PC, HP ProBook 4430s Notebook PC, HP ProBook 4530s Notebook PC and HP ProBook 4730s Notebook PC
Technical Specifications
System Fan Off | Sound Power | Sound Pressure |
| (LWAd, bels) | (LpAm, decibels) |
Idle | 3.5 | 32.1 |
Fixed Disk | 4.1 | 37.8 |
(random writes) |
|
|
System fan is usually off except when charging the battery |
| |
Batteries | This battery(s) in this product comply with EU Directive 2006/66/EC | |
| Batteries used in the product do not contain: |
|
| Mercury greater the 5ppm by weight |
|
| Cadmium greater than 10ppm by weight | |
| The battery type and chemistry used in the product is: | |
| CR2032 (coin cell), |
|
| ||
Additional | This product is in compliance with the Restrictions of Hazardous | |
information | Substances (RoHS) directive - 2002/95/EC. |
|
This HP product is designed to comply with the Waste Electrical and
Electronic Equipment (WEEE) Directive - 2002/96/EC.
This product is in compliance with California Proposition 65 (State of
California; Safe Drinking Water and Toxic Enforcement Act of 1986).
This product is in compliance with the IEEE 1680 (EPEAT) standard at the Gold level, see www.epeat.net
Plastics parts weighing over 25 grams used in the product are marked per ISO 11469 and ISO1043.
This product contains 0% post consumer recycled plastic (by wt.)
This product is greater than 95.1%
Packaging Materials
External:
Corrugated 115 g
Corrugated Carton 455 g
Canon bag 5 g Internal:
Polyethylene low density 15g
Molded pulp 190g
The Corrugated carton packaging material is made from 80% recycled content.
The Corrugated packaging material is made from 80% recycled content.
The Canon Bag packaging material is made from 80% recycled content.
The Polyethylene low density packaging material is made from 60% recycled content.
The Molded Pulp packaging material is made from 60% recycled content.
HP follows these guidelines to decrease the environmental impact of
DA - 13948 Worldwide QuickSpecs — Version 4 — 4.1.2011 | Page 39 |
