To configure multi-channel audio output for speakers configuration

1Click Start on the taskbar.

2Choose All Programs.

3Click Multi-channel Sound Manager, and then click Multi-channel Sound Manager again. The Audio Configuration window opens.

Note: If you do not see the Speaker Configuration tab, your PC does not have the multi-channel capability.

4Click the Speaker Configuration tab. (Your speakers must be connected to see this tab.)

5Select the option describing the number of speakers in your system, for example,

6 speaker mode (for 5.1 channels). You can click the Speaker Test tab and then click on a speaker to test it.

6Click OK.

28

HP Pavilion home PC

To configure multi-channel audio output for the DVD player

Note: WinDVD is set up for two (stereo) speaker output. In order to hear all speakers on multi-channel DVD movies, change the audio properties for WinDVD so that they match your speaker configuration (set in the previous procedure) and the recorded DVD capability.

1Insert a DVD or start InterVideo WinDVD Player. (See “Playing a DVD” on page 68.)

2Right-click anywhere in the WinDVD video window, and then click Setup.

3Click the Audio tab.

4Click the option for the number of speakers that matches your multi-channel speaker system. Click Apply.

You can then test the speakers: click the Test button and the WinDVD control panel shows the speaker number being used. Click Stop.

5Click OK.