16 Connect the USB cable

Windows Users:

aFollow the onscreen instructions until you see the prompt to connect the USB cable. (This may take several minutes.)

Once the prompt appears, connect the USB cable to the port on the back of the HP All-in-One, and then to any USB port on your computer.

If you do not see this screen, see Troubleshooting in the last section.

bFollow the onscreen instructions. Complete the Fax Setup Wizard and the Sign up now screens. After you complete software installation, you are finished.

Macintosh Users:

a Connect the USB cable to the port on the back of the HP All-in-One, and then to any USB port on your computer.

bDouble-click the HP All-in-One Installer icon.

cMake sure you complete all screens, including the Setup Assistant. After you complete software installation, you are finished.

HP All-in-One • 7