HP 574412-DOC 1.5 Required Resources, 1.6Prerequisites

•18 releasable cable ties shown in Figure 1-2.

Figure 1-2 Releasable Cable Tie

•The fasteners specified in Table 1-1.

Table 1-1 Fasteners

Quantity	Size	Format	Torque	Description
2	M6 cage nuts	Square nut	N/A	Cage nut for M6 screw.
2	M6 x 16 mm	Posidrive	25-30 in/lb	Machine screw. For use with M6 cage nut.
	pan head screws

To prevent screws from becoming loose because of vibration, HP recommends that you use an adjustable torque drive, set to the torque specifications given in Table 1-1. Contact your HP sales representative if any parts are missing.

1.5 Required Resources

To install the HP cable management kit, you require the following resources:

•Tools:

—Screwdriver, #2 (medium) Phillips

—Cage-nut insertion tool (shipped with the rack) or a flat-headed screwdriver

—Marker pen or masking tape

—Diagonal cutting pliers

•Resources: Cables of the type used by the InfiniBand switch.

1.6Prerequisites

Before you begin to mount the bracket:

•Follow the cable-handling precautions for InfiniBand cables. For more information, see the HP Cluster Platform InfiniBand Interconnect Installation and User's Guide at:

http://www.docs.hp.com/en/highperfcomp.html

•Obtain the set of cabling tables required for your solution (if applicable).

•Read the hardware installation guide for the InfiniBand switch you are installing.

6Preparing for Installation