Attach the control-panel overlay if not attached

Attach the control-panel overlay (if not attached)

b	a Align the tabs of the control panel
	overlay with the device, and then
	lower.

b Press down ﬁrmly on all edges and

in the center of the overlay until it snaps into place.

The control-panel overlay must be attached for the HP all-in-one to work!

a Insert the bottom paper tray.

b Slide the paper adjuster over.

c Insert paper.

d Insert the top (output) tray.	e Pull, and then ﬂip the tray extender out.
6 Connect the power cord and adapter
	Important: Do NOT connect the USB
	cable until Step 16 or software may not
	install properly.

2• HP all-in-one