■Press the down arrow key or up arrow key to select the
Or
■Press the down arrow key to highlight the First Boot Device selection. Press the + (plus) key until Floppy is the selection.
18Press the F10 key to save the changes and exit BIOS.
19With Yes selected, press Enter. After the computer restarts, a series of startup screens appear. To proceed with the initial Microsoft Windows setup, you must answer a few questions.
20Complete the registration process, and then reconnect all peripheral devices.
21Reinstall software not originally installed on the computer by the factory.
22Copy data files you saved on the backup CD or diskette you made to your hard disk.
Note: If you have questions about the system recovery procedure, please contact Support; see your support documentation included with the computer documentation.
