HP 6910p manual Broadcom 4321AGN, 802.11a/b/g/draft-n WiFi, Frequency Support

QuickSpecs		HP Compaq 6910p Notebook PC
	4.

Technical Specifications5.

Windows 2000 or XP. WLAN may also be compatible with certain third-party software supplicants.

Broadcom 4321AGN	Wireless LAN Standards	IEEE 802.11a
802.11a/b/g/draft-n WiFi		IEEE 802.11b
Adapter		IEEE 802.11g
		IEEE 802.11n (draft)
	Interoperability	Wi-Fi certified (802.11abg only)
		Cisco Compatible Extensions Program compliant (802.11abg only) with
		Microsoft Windows 2000 and XP (details at
		http://www.hp.com/go/notebooks/WLAN)
		Tested with wireless access points from several major manufacturers
		(details at http://www.hp.com/go/notebooks/WLAN/draft-n)
	Frequency Band	2.4 GHz and 5 GHz
	Data Rates	802.11b: 1, 2, 5.5, 11 Mbps
		802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
		802.11n (draft): 6, 6.5, 9, 12, 13, 13.5, 18, 19.5, 24, 26, 27, 36, 39,
		40.5, 48, 52, 54, 58.5, 65, 78, 81, 104, 108, 117, 121.5, 130, 135,
		162, 216, 243, 270 Mbps
	Frequency Support	20 MHz: 2.4 GHz and 5 GHz bands
		40 MHz: 5 GHz band only
	Modulation	Direct Sequence Spread Spectrum
		DBPSK, DQPSK, CCK, OFDM, BPSK, QPSK, 16-QAM, 64-QAM
	Security1	Supports 64- and 128-bit WEP, WPA, WPA2, hardware-accelerated AES,
		802.1x authentication types EAP-TLS, EAP-TTLS, PEAP-GTC, PEAP-
		MSCHAPv2, LEAP, EAP-FAST.
		Support for Cisco Security Features (proven compatibility with Cisco Aironet
		infrastructure products through the Cisco Compatible Extensions Program
		Version 4) with Microsoft Windows 2000 and XP only.
	Sub-channels	Multinational support with frequency bands and channels compliant to local
		regulations.
	Media Access Protocol	CSMA/CA (Collision Avoidance) with ACK
	Network Architecture	Ad-hoc (Peer to Peer)
	Models	Infrastructure (Access Point Required)
	Roaming	IEEE 802.11 compliant roaming between access points
	Output Power (for CKK)2	17 dBm
	Output Power (for OFDM; 15 dBm
	power varies by data
	rate)2
	Power Consumption	Idle associated: 300 mW
		Idle unassociated: 150 mW
		Transmit/Receive 20 MHz channel: 2.6 W (max)
		Transmit/Receive 40 MHz channel: 3.3 W (max)
	Power Management	ACPI compliant power management
		802.11 compliant power saving mode
	Receiver Sensitivity3	270 Mbps: -66dBm, 162 Mbps: -72 dBm, 54 Mbps: -72 dBm, 11 Mbps: -
		85 dBm , 1 Mbps: -94 dBm

DA - 12699 Worldwide — Version 13 — November 14, 2007 Page 39