QuickSpecs

HP EliteBook 6930p Notebook PC

Technical Specifications

 

* The specifications for 802.11n draft 2.0 are draft specifications and are

 

not final. If the final specifications differ from the draft specifications, it may

 

affect the ability of the notebook to communicate with other 802.11n WLAN

 

devices. In countries where n draft 2.0 is not allowed, this capability is not

 

enabled.

 

Interoperability

Wi-Fi certified (802.11abg only)

 

Cisco Compatible Extensions Program compliant (802.11abg only) with

 

Microsoft Windows Vista and XP (details at:

 

http://www.hp.com/go/notebooks/WLAN)

 

Tested with wireless access points from several major manufacturers

 

(details at: http://www.hp.com/go/notebooks/WLAN/draft-n)

Frequency Band

2.4 GHz and 5 GHz

 

Antenna Structure

3 transmit; 3 receive (3x3)

 

Data Rates

802.11b: 1, 2, 5.5, 11 Mbps

 

802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps

 

802.11n (draft): 66 possible data rates, ranging from 6 Mbps to 450

 

Mbps, depending on the combination of Bandwidth, Modulation Coding

 

Scheme, and Guard Interval used, as defined in IEEE 802.11n (draft)

 

specification

 

Modulation

Direct Sequence Spread Spectrum

 

DBPSK, DQPSK, CCK, OFDM, BPSK, QPSK, 16-QAM, 64-QAM

Security1

Supports 64- and 128-bit WEP, WPA, WPA2, hardware-accelerated AES

 

(support for key sizes of 128, 192, and 256 bits), 802.1x authentication

 

types EAP-TLS, EAP-TTLS, PEAP-GTC, PEAP-MSCHAPv2, LEAP, EAP-FAST.

 

Support for Cisco Security Features (proven compatibility with Cisco Aironet

 

infrastructure products through the Cisco Compatible Extensions Program

 

Version 4) with Microsoft Windows Vista and XP only.

Sub-channels

Multinational support with frequency bands and channels compliant to local

 

regulations.

 

Media Access Protocol CSMA/CA (Collision Avoidance) with ACK

Network Architecture

Ad-hoc (Peer to Peer)

 

Models

Infrastructure (Access Point Required)

Roaming

IEEE 802.11 compliant roaming between access points

Output Power (for CCK)215 dBm

 

Output Power (for OFDM;15 dBm

 

power varies by data

 

 

rate)2

 

 

Power Consumption

Transmit: 2.3 Watts (average, with three spatial streams)

 

Receive: 1.9 Watts (average with three receive chains)

 

Idle mode3: 30 mW (average)

 

Radio off: 20 mW (max)

 

Power Management

ACPI compliant power management

 

802.11 compliant power saving mode

Receiver Sensitivity4

300 Mbps: -68 dBm, 54 Mbps: -74 dBm, 6 Mbps: -90 dBm

Antenna Connections

3 U.FL type connectors, 50 ohm nominal impedance

Range

802.11 a – Typical

600 feet – Outdoor Open Area

 

(@6 Mbps)

150 feet – Indoor, Office environment

DA - 13061 Worldwide QuickSpecs — Version 8 — 10.10.2008

Page 33

Page 33
Image 33
HP 6930p manual Enabled, DBPSK, DQPSK, CCK, OFDM, BPSK, QPSK, 16-QAM, 64-QAM