Side trim

NOTE: The side trim is included in the Trim Kit, spare part number 727661-001. The Trim Kit also includes the system board bracket and the volume control button actuator.

Before removing the side trim, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the rear cover (see Rear cover on page 14).

5.Remove the battery (see Battery on page 16).

Remove the side trim:

▲Remove the side trim (1) from the retaining clips built into the display assembly.

NOTE: When the side trim is removed, the volume control button actuator (2) is prone to slipping out of the side trim. Make note of the location and orientation of the volume control button actuator when removing the side trim.

Reverse this procedure to install the side trim.

26

Chapter 4 Removal and replacement procedures preliminary requirements