Unloading images to a Macintosh computer
Unloading is the process of copying images from the CF memory card in the camera to a computer.
You can unload images from your camera in two ways: automatically, or by mounting the camera as a disk drive. The automatic unload procedure is described below.
Note | To conserve battery power, use an |
| adapter (optional) when you are unloading images |
| to a computer. |
|
|
To automatically unload images to a Macintosh computer
1Connect the camera to your computer by using the USB cable.
2Turn on the camera.
The status LCD displays PC to indicate the camera is connected to a computer.
3If the welcome screen appears on your computer screen, click OK.
4After a few seconds, the Automatic Image Unload window appears. When the countdown timer expires, the software begins unloading new images from the camera to the computer. To pause the automatic unload, click Pause.
You can set up your Automatic Image Unload software so that certain tasks occur automatically after the images are unloaded from the camera. To gain access to these options, click Options.
When all the new images have been unloaded to your computer, the ArcSoft PhotoImpression software opens and you can view, edit, print, and create projects with your images.
For more information, see the ArcSoft software Help.
38 | HP photosmart 715 user guide |